How much oil does a Dodge Caliber hold?
For most Dodge Caliber models, the oil capacity depends on the engine: about 4.5 quarts (roughly 4.3 liters) for the 2.0-liter engine and about 5.5 quarts (roughly 5.2 liters) for the 2.4-liter engine, including the oil filter. Always confirm the exact specification in your owner's manual and by checking the dipstick after filling.
Engine options and oil capacity
The Caliber was offered with two four-cylinder engines. The capacity you need depends on which engine your car has. The figures below reflect typical capacities including the oil filter when performing a full oil change. For exact numbers, check the vehicle’s dipstick and owner's manual.
Before listing the capacities, note that these figures are intended to guide you during an oil change and assume a new filter is installed.
- 2.0 L I4 engine: approximately 4.5 quarts (about 4.3 liters) of oil with filter.
- 2.4 L I4 engine: approximately 5.5 quarts (about 5.2 liters) of oil with filter.
These capacities are typical for most model years of the Caliber; some variations may exist based on year, transmission, or regional specifications. Always verify with the service manual or dealer if your vehicle has uncommon equipment.
Oil type and service tips
The recommended oil viscosity for many Dodge Caliber models is commonly 5W-20, though your manual may specify 5W-30 in certain climates or for specific engine variants. Use a new oil filter during every oil change and recheck the level with the dipstick once you’ve added oil to reach the correct mark.
Summary
The Dodge Caliber’s oil capacity varies by engine: roughly 4.5 quarts for the 2.0-liter engine and about 5.5 quarts for the 2.4-liter engine, including the filter. Always consult the owner's manual for your exact model year and engine, and follow the manufacturer’s recommended viscosity and service guidelines.
How many quarts of oil does a 4.6 L engine take?
The oil capacity for a 4.6L Ford engine is typically 6 quarts with a filter change, though older models may have initially been specified for 5 quarts. Ford later updated the recommendation to 6 quarts for many vehicles to prevent oil starvation, and it's important to always check the dipstick after refilling to ensure the correct level.
- Standard capacity: 6 quarts with a filter change.
- Older models: Some older models were originally listed with a 5-quart capacity, but a 6-quart fill is often recommended now, particularly starting around the 2002 model year.
- Always check the dipstick: After adding the new oil, run the engine briefly, then check the dipstick on a level surface to confirm the oil level is correct and to avoid overfilling.
How many quarts of oil does a 3.6 L Chrysler engine take?
The oil capacity for a Chrysler 3.6L engine is typically 5 to 6 quarts, depending on the specific model, but the exact amount can vary. For example, the 3.6L Pentastar "Upgrade" engine requires about 5 quarts, while other models like a 2019 Chrysler 300 can take up to 5.9 quarts with a filter change. Always check your owner's manual for the precise capacity for your vehicle and remember to check the dipstick after refilling.
Oil capacity by model (approximate)
- Chrysler Voyager (2024): 5 quarts
- Chrysler 300 (2019): 5.9 quarts
- Chrysler Pacifica (2020): 5.3 quarts
- Chrysler Town and Country (2016): 5.5 quarts
Important considerations
- Check the dipstick: Always check the oil level with the dipstick after refilling to ensure it's at the correct level.
- Consult your owner's manual: The most accurate information for your specific vehicle will be in your owner's manual.
- Pentastar upgrade engine: Some newer models with the "Upgrade" version of the 3.6L engine have an oil capacity of approximately 5 quarts.
How many quarts of oil does a 3.7 L V6 engine take?
6.0 qt
Capacities and Specifications - 3.7L
| Item | Capacity |
|---|---|
| Engine oil | 6.0 qt (5.7 L) |
| Engine coolant | 13.2 qt (12.5 L) |
| Brake fluid | Between MIN/MAX on brake fluid reservoir |
| Rear differential fluid (All Wheel Drive) | 2.4 pt (1.15) |
How many quarts of oil does a Dodge Caliber take?
And Dodge recommends 5W20. But since we live in a very hot part of the world right here in Oklahoma. We are going to use 5W30 for summertime and 5W20 for winter time.
