How much oil does a F250 Super Duty take?
For most gasoline F-250 Super Duty models, the engine oil capacity is about 6 quarts (roughly 5.7 liters) with a new filter; the diesel-equipped 6.7L Power Stroke typically requires around 15 quarts (roughly 14.2 liters) with a filter. Exact numbers depend on the engine variant and model year, so always verify in the owner’s manual or on the under-hood information sticker.
The Ford F-250 Super Duty lineup includes several engine options, and oil capacity is not identical across them. This article breaks down the typical capacities by engine type and offers guidance on how to check and change the oil properly.
Gasoline engine options
The following capacities cover the common gasoline engines used in recent F-250 Super Duty trucks. They represent typical drain-and-fill volumes with the oil filter installed.
- 3.5L EcoBoost V6: approximately 6 quarts (5.7 L) with filter
- 6.2L V8 gas: approximately 6 quarts (5.7 L) with filter
- 7.3L V8 gas (Godzilla): approximately 6 quarts (5.7 L) with filter
These figures assume a standard filter and do not account for any additional accessories or variations that might slightly alter the total capacity.
Diesel engine option
The diesel option in the F-250 Super Duty is the 6.7L Power Stroke. Its oil capacity is significantly larger due to the demands of a turbocharged diesel engine.
- 6.7L Power Stroke diesel: approximately 15 quarts (14.2 L) with filter
As with gasoline engines, always confirm the exact capacity for your specific model year and configuration, since filter size or added equipment can cause small variations.
Checking and changing oil: a quick guide
If you’re planning a DIY oil change, here are general steps to ensure you use the correct amount and avoid overfilling:
- Cool or warm the engine to a safe operating temperature, then turn it off and wait a few minutes for the oil to settle.
- Place a drain pan under the vehicle and remove the drain plug to allow old oil to drain completely.
- Remove and replace the oil filter with a new one, ensuring it’s properly seated.
- Install the drain plug securely and add the appropriate amount of fresh oil specified for your engine.
- Pour gradually, then check the oil level with the dipstick until it reaches the full mark.
- Run the engine briefly, turn it off, recheck for leaks, and confirm the oil level again after a brief cooldown.
If you’re unsure about the process or the exact capacity for your truck, have the service performed by a qualified mechanic. Overfilling can cause pressure issues, while underfilling can lead to insufficient lubrication.
Summary
The Ford F-250 Super Duty’s oil capacity varies by engine. Gasoline variants generally require about 6 quarts of oil with a new filter, while the 6.7L Power Stroke diesel needs about 15 quarts with a filter. Always verify the precise figure for your specific model year and engine in the owner’s manual or on the under-hood placard, as exact numbers can differ slightly due to filters or accessories.
