How much oil does a Lexus LS 460 take?
The LS 460 typically takes about 8.5 quarts (8.0 liters) of engine oil, including the filter.
The 4.6-liter V8 engine used in most LS 460 models (engine code 1UR-FSE) requires roughly this amount, though exact capacity can vary slightly by model year and maintenance actions such as filter replacement. Always verify the exact specification for your VIN in the owner's manual or service manual.
Oil capacity overview
Most LS 460 models — including the standard wheelbase LS 460 and the long-wheelbase LS 460L — use a 4.6L V8 and require about 8.5 quarts (8.0 liters) of engine oil with the filter. The exact amount can vary by year and whether the filter is replaced; consult the manual for your specific trim to confirm the precise capacity.
How to perform an oil change or check the oil
Use this practical checklist to ensure you fill and check the level correctly.
- Oil grade: Synthetic 5W-30 is commonly recommended; check your owner's manual for the exact specification and any alternatives for your market or model year.
- Oil capacity: Approximately 8.5 quarts (8.0 liters) with the filter; this can vary slightly by year and whether the filter is changed.
- New filter: Use a replacement filter that meets OEM specifications; install cleanly and tighten to the recommended torque.
- Refill process: After draining, reinstall the drain plug, fill gradually, run the engine to operating temperature, and check the level with the dipstick; top up to the full mark if needed.
- Disposal and cleanup: Properly dispose of used oil and filters at an approved facility.
Note: For the exact figure and procedure, consult the owner's manual or a Lexus dealership. This helps ensure you meet the specific requirements for your vehicle's year and trim.
Additional considerations
Oil change intervals vary with driving conditions; modern Lexus vehicles often use synthetic oil that supports extended intervals. Always confirm the recommended schedule in the manual or with the dealer, and adjust for severe-service conditions if needed.
Summary
The Lexus LS 460 typically takes about 8.5 quarts (8.0 liters) of engine oil, including the filter, with a recommended synthetic 5W-30 oil. Capacity can vary slightly by year and engine variant, so verify the exact specification for your VIN in the owner's manual or service manual. When changing oil, replace the filter, fill carefully, and check the level to ensure proper operation.
How many quarts of oil does a 4.0 L V6 take?
The 4.0L V6 oil capacity varies by vehicle, but a common capacity is around 5.5 quarts, though some may need up to 6 quarts. For example, a 2015 Toyota Tacoma with a 4.0L V6 takes about 5.5 quarts for a 4WD model, while a 2007 Nissan Frontier 4.0L V6 takes about 6 quarts with a filter change. Always consult your owner's manual for the exact amount and type of oil required for your specific vehicle.
Oil capacity examples for 4.0L V6 engines
- Toyota Tacoma (2015): Around 5.5 quarts for 4WD models (5.5 quarts with filter).
- Nissan Frontier (2007): Around 6 quarts with a filter change.
- Jeep (engine specific): Around 6 quarts (5.68 L).
- Ford Ranger (2011): Around 5 quarts with a filter change.
How to find the correct capacity
- Check your owner's manual: This is the most reliable source for your specific make and model.
- Use a vehicle-specific online guide: Websites like AMSOIL or Blauparts have lookup tools to find the right oil and capacity for your car.
- Consult a professional: If you are unsure, a mechanic can provide the correct oil and capacity.
How many quarts of oil does a LS460 take?
Capacity: 9.1 quarts (with filter).
How much oil does a LS v8 take?
6.6 quarts (with filter).
What oil is recommended for Lexus LS 460?
The Lexus LS460 requires 0W-20 or 5W-20 engine oil, with full synthetic being the recommended type for extended oil change intervals. It's crucial to check the owner's manual for the exact specifications and to ensure the oil meets or exceeds API and ILSAC standards.
Recommended oil type and specifications
- Viscosity: 0W-20 or 5W-20 (all-temp)
- Oil type: Full synthetic is recommended for better performance and longer service intervals. However, a synthetic blend or conventional oil can be used if changed more frequently.
- Standards: Look for oil that meets or exceeds API SP/SN PLUS/SN/SM and ILSAC GF-6 specifications.
How to choose the right oil
- Full synthetic: Provides the best performance, especially in temperature extremes, and allows for the longest service intervals (around 10,000 miles).
- Synthetic blend: A mix of synthetic and conventional oil that offers better performance than conventional oil and allows for longer intervals than conventional, but not as long as full synthetic (around 8,000 miles).
- Conventional: A traditional mineral-based oil that is the cheapest option but requires more frequent changes (around 6,000 miles).
- Consult your owner's manual: Always check your specific model's owner's manual for the definitive requirements, as recommendations can vary slightly by model year.
