How much oil does a Sprinter 2.0 diesel take?
The Sprinter with the 2.0-liter diesel typically requires about 5 liters of engine oil for a full change, including a new oil filter. While 5.0 L is a solid baseline, the exact amount can vary by year, market, and filter configuration, so always verify with the vehicle’s manual or service data for your VIN.
Oil capacity basics for the Sprinter 2.0 diesel
In most Sprinter models powered by the 2.0-liter OM654 diesel, the official baseline oil capacity is set to accommodate a standard full-synthetic oil change with a new filter. Small variations can occur depending on model year and filter design, so it’s wise to confirm the exact figure for your vehicle.
Baseline capacity for the OM654 2.0L Sprinter
Before presenting the typical figure, this section explains that the following value reflects the standard capacity Mercedes-Benz cites for the OM654 2.0L engine family used in Sprinters. This helps set expectations for most owners.
- Oil capacity including the filter: approximately 5.0 liters (about 5.3 quarts in US measurement).
Concluding note: For a precise figure, refer to your vehicle’s service data or owner’s manual, as exact capacity can vary slightly by year, region, and filter type.
Practical guidance for oil changes and checks
Owners performing an oil change should approach the process with a plan that accounts for warm-up, drainage, and careful topping to the correct level. Always use oil that meets Mercedes-Benz specifications and follow the recommended procedure for your model year.
Model-year and variant considerations
While 5.0 liters is the typical figure for modern Sprinter 2.0L diesels, some older or region-specific variants might show minor differences. Always consult the exact service data for your VIN to ensure accuracy, especially if your Sprinter has additional hardware or modifications that could affect capacity.
Summary
For most Sprinter vans powered by the 2.0-liter diesel, plan on about 5 liters of engine oil for a full change, including the oil filter. Always confirm the exact capacity with your owner’s manual or Mercedes-Benz service data for your specific VIN, and adjust for regional specifications or unusual equipment. Proper filling and level checking will ensure optimal engine lubrication and performance.
