How much oil does a Toyota Avalon 3.5 take?
The Toyota Avalon with the 3.5-liter V6 (2GR-FE) typically requires about 6.4 quarts (approximately 6.1 liters) of engine oil for a full change when a new filter is installed. This figure is the standard capacity cited for most 3.5L Avalon models.
The exact capacity can vary slightly by model year and specific engine variant used in your Avalon. Always verify the precise specification in your owner’s manual or a trusted service guide for your exact year and configuration.
Typical oil capacity for the Avalon 3.5L V6
Here is the standard capacity commonly cited for a full oil change with the filter replaced on most Avalon 3.5L V6 models.
- 6.4 quarts (6.1 liters) of engine oil, including a new filter, for a typical full change on the 2GR-FE 3.5L engine.
Note: Oil grade recommendations can vary by year and climate. Check your owner's manual or the under-hood sticker for the recommended viscosity (for example, 0W-20 or 5W-30) and follow the service guidance for your specific Avalon.
Oil type and fill considerations
Use the oil specification and fill procedure outlined in your vehicle’s manual. After refilling, always confirm the level with the dipstick and run the engine briefly to circulate the new oil before rechecking the level.
Practical tips for a smooth oil change
Prepare the correct tools, a compatible oil filter, and the recommended oil grade before beginning. Warm the engine slightly to help draining, replace the filter, and add oil gradually, checking the level as you go to avoid overfilling.
Summary
For most Avalon models equipped with the 3.5L V6 (2GR-FE), plan to use about 6.4 quarts (6.1 liters) of engine oil for a full change with a new filter. Always refer to your specific year’s manual for any minor variances and the recommended oil viscosity to ensure optimal performance and engine health.
How much oil does a 3.5 L V6 Toyota engine take?
6.1 quarts
3.5L V6 Engine: 6.1 quarts with filter. 2.5L Hybrid Engine: 4.5 quarts with filter.
How much oil does a 3.5 Avalon take?
If 0W-20 is not available 5W-20 may be used. However, it must be replaced with 0W-20 at the next oil change. Capacity: 5.7 quarts (with filter).
How much oil does a 2015 Toyota Avalon 3.5 V6 take?
6.4 quarts
Engine Oil
However, it must be replaced with 0W-20 at the next oil change. Capacity: 6.4 quarts (with filter).
How much oil does a 2019 Toyota Avalon 3.5 take?
The 2019 Toyota Avalon with a 3.5L V6 engine has an oil capacity of 6.4 quarts (approximately 6.1 liters) when changing the oil and filter. It is recommended to use a 0W-20 viscosity grade synthetic oil for this vehicle.
- Capacity: 6.4 quarts (6.1 L) with filter change
- Oil Type: 0W-20 full synthetic
