How much oil does an Acura need?
Most Acura engines require roughly 4.5 to 5.5 quarts of oil with a filter, depending on the model and engine. The exact amount for your car is specific to its engine family and year—consult the owner's manual to be sure.
Understanding why oil capacity varies by model and engine
Acura’s lineup includes compact sedans, SUVs, and performance variants, each using different engine designs. The oil capacity changes with engine displacement, the number of oil passages, and whether a filter is included in the quoted capacity. For example, four-cylinder engines generally hold less oil than larger V6 units, and turbocharged engines have their own specifications. Always verify the exact figure for your car.
Estimated ranges by engine type
Here is a general guide to typical capacities by common engine configurations. These figures are approximate and assume a standard oil filter change.
- Four-cylinder engines (roughly 2.0–2.4 liters): about 4.5–5.0 quarts with filter.
- V6 engines (roughly 3.0–3.5 liters, e.g., J-series): about 5.5–6.0 quarts with filter.
- Turbocharged engines (e.g., 2.0L turbo): about 5.0–5.2 quarts with filter.
These ranges cover most modern Acura models, but the exact amount your car needs can vary by year and configuration. Always confirm the precise capacity for your vehicle before an oil change.
Where to find the exact capacity for your Acura
To ensure you fill to the correct level, use reliable sources that reflect your exact car’s specifications. This is especially important after an oil filter change, which can add roughly a half-quart to the total.
- Owner's manual — Specifications section lists the engine oil capacity (with and without filter) for your exact model and year.
- Under-hood information sticker — Typically near the front or side of the engine bay; many newer models print capacity and recommended viscosity here.
- ACURA/Japan-based service portal or VIN lookup — Offers VIN-specific oil capacity and oil type recommendations.
- Dealership or certified technician — Can confirm the precise number for atypical configurations or special editions.
With the exact figure in hand, you can plan your oil changes accurately and avoid under- or over-filling the engine, which can affect performance and longevity.
Oil viscosity and maintenance basics
Recommended oil grade for most modern Acuras
Most modern Acura models call for 0W-20 synthetic oil to maximize fuel efficiency and protection across a wide temperature range. Some older engines or special editions may specify 5W-20; always follow the exact grade listed in your manual.
When performing maintenance, use a quality oil filter and check the oil level after the engine reaches operating temperature, allowing the oil to settle before measuring with the dipstick. Refill gradually if needed, and never overfill.
Bottom line and practical steps
In practice, plan on roughly 4.5–5.5 quarts for most four-cylinder Acuras and 5.5–6.0 quarts for most V6 models. Confirm the precise capacity for your year and engine to avoid errors, and always use the recommended oil weight and type.
Summary: The exact oil capacity for an Acura varies by engine and year, but most contemporary models require about 4.5–5.5 quarts with filter. Check the owner’s manual, the hood sticker, or VIN-based service resources to confirm your car’s specific requirement, and use the recommended 0W-20 full synthetic oil for most modern Acuras.
How much oil do you put in a 3.6 L V6?
The oil capacity for a 3.6L V6 engine is typically 5 to 6 quarts, but it varies by vehicle model and year. For a 2020 Dodge Charger, it's around 5.9 quarts, while a 2023 Jeep Wrangler requires 5 quarts. Newer Jeeps, such as the 2016-2021 Grand Cherokee and Durango, often require 6 quarts. Always check your specific owner's manual for the most accurate information, as it can differ even within the same engine family.
- 5 quarts: Common in many models like the 2020 Jeep Wrangler and 2025 Ram 1500.
- 5.9 quarts: The capacity for some models, such as the 2020 Dodge Charger.
- 6 quarts: Required for certain vehicles, including the 2013 JK Jeep Wrangler and some 2016-2021 Grand Cherokee and Durango models.
- Check your owner's manual: This is the most reliable source for your specific vehicle's oil capacity.
- After refilling: It's important to check the oil level with the dipstick after refilling to ensure it is correct.
How much oil does an Acura take?
The 3.5L V6 engine typically has an oil capacity of 5.7 quarts with a filter.
How many quarts of oil for a 2009 Acura MDX?
The 2009 Acura MDX has an engine oil capacity of 4.5 quarts with a new filter, and uses 5W-20 motor oil. Always check the dipstick to ensure the proper oil level after refilling, as the exact amount can vary slightly.
- Oil capacity with filter: 4.5 quarts
- Recommended oil type: 5W-20 (all temperatures)
- Torque for oil drain plug: 29 ft-lbs
How many quarts of oil does a 3.7 L V6 take?
A 3.7L V6 engine typically requires 6 quarts of oil, including the oil filter. However, the exact amount can vary slightly depending on the vehicle, so it is always best to check your owner's manual for the most accurate information for your specific make and model.
- Capacity: Most 3.7L V6 engines, such as those found in many Ford and Jeep models, require about 6 quarts of oil when replacing the filter.
- Verification: After refilling, always check the dipstick to ensure the oil level is correct. Do not overfill.
- Owner's Manual: To confirm the exact oil capacity and the correct oil viscosity for your specific vehicle, consult your owner's manual.
