Loading

How much oil does an Integra take?

Most Integra models with the common B-series engines take about 4.5 quarts of oil when changing the filter.


Oil capacity varies by engine type and model year. The later B-series engines (1.8L) typically require about 4.5 quarts (4.3 liters) with a filter, while the early D-series 1.6L engines used in the oldest Integras take roughly 3.7 quarts (3.5 liters) with a filter. If you skip changing the oil filter, the total capacity you need is a little less. Always confirm with the owner's manual for your exact model year and engine, and verify the final level with the dipstick after filling.


Engine families and their typical oil capacities


Below are the typical capacities by engine family used across Integra generations. This serves as a baseline; exact amounts can vary by year, oil filter size, and any modifications. Use this as a reference and always check your manual.



  • B-series engines (commonly 1.8L in late-era Integras): about 4.5 quarts (4.3 liters) of oil with an oil filter.

  • D-series engines (early 1.6L Integras): about 3.7 quarts (3.5 liters) of oil with an oil filter.


After filling, make sure to recheck the oil level with the dipstick once the oil has had a moment to settle, and top up if necessary to reach the full mark.


Practical tips for filling and checking oil


These practical tips help ensure you fill correctly and avoid over- or underfilling.



  • Use the oil viscosity recommended for your year and climate (typically 5W-30; some climates may allow 5W-20). Check the owner’s manual for specifics.

  • Replace the oil filter at the same time as a full oil change to preserve filtration capacity.

  • Pour oil gradually in stages, pausing to check the level with the dipstick after each stage.

  • Run the engine briefly after adding oil, then turn it off and recheck the level once the oil settles.

  • Inspect for leaks around the drain plug and filter and reseat components if needed; keep to the recommended torque and specifications.


Summary


Oil capacity in an Integra depends on the engine family: about 4.5 quarts (4.3 L) with a filter for most B-series engines, and around 3.7 quarts (3.5 L) with a filter for the older D-series. Always verify against your exact model year and engine, and use the dipstick to confirm the final level after a fill and a brief settling period.

How many quarts of oil does a 3.8 L V6 take?


A 3.8L V6 engine typically takes between 4.5 and 6 quarts of oil, depending on the specific vehicle and year. For example, a 1994-2004 Ford Mustang with a 3.8L V6 needs about 5 quarts, while a 2007-2011 Jeep Wrangler with a 3.8L V6 takes about 6 quarts. Always check your vehicle's owner's manual or consult a reliable source, like an oil capacity chart, to confirm the exact amount for your specific model, and always check the oil level with the dipstick after refilling. 
Here are some examples of oil capacities for different vehicles with a 3.8L V6 engine: 

  • Ford Mustang (1994-2004): ~5 quarts
  • Jeep Wrangler (2007-2011): ~6 quarts
  • Pontiac Grand Prix (2008, 3800 V6): ~4.5 quarts
  • Buick LeSabre (2000): ~7.4 quarts



How much oil does a 2.4 L engine hold?


A 2.4-liter engine typically takes between 4.5 and 5.5 quarts of oil, but the exact amount varies by vehicle. It is essential to consult your owner's manual or check the dipstick to determine the correct capacity for your specific car. 

  • Common capacity: Many 2.4L engines hold around 5 quarts, such as the Chevrolet Equinox and Kia Optima. 
  • Varying capacity: Some engines, like certain Mitsubishi models, may require 4.5 quarts, while others, like the Jeep Cherokee, might need 5.5 quarts. 
  • Check the dipstick: After adding oil, always use the dipstick to verify the level is between the "full" and "add" marks, adding small amounts as needed. 



How much oil for Integra?


The engine has an oil capacity of approximately 5.7 quarts with an oil filter replacement, and it is recommended to use SAE 0W-20 full synthetic oil.



How much oil does a 1.8 L engine take?


The engine oil capacity for a 1.8L engine varies by vehicle, but common capacities are around 3.9 quarts (3.7 liters) for a Honda Civic or 4.4 quarts (4.2 liters) for a Toyota Corolla. Other 1.8L engines, such as a turbocharged Volkswagen Golf, may require about 5.8 quarts (5.5 liters). Always check your vehicle's owner's manual for the specific amount. 

  • Honda Civic (1.8L): Approximately 3.9 quarts (3.7 liters). 
  • Toyota Corolla (1.8L): Approximately 4.4 quarts (4.2 liters) when changing the filter. 
  • Volkswagen Golf (1.8T): Approximately 5.8 quarts (5.5 liters). 
  • Other vehicles: Consult your owner's manual for the exact capacity, as it can differ between makes and models. 


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.