How much should a brake job cost on a Honda CR V?
As a trusted auto service provider with years of experience in car maintenance and repair, I often get asked about the cost of common repairs, such as brake jobs. If you own a Honda CR-V and are wondering how much you should expect to pay for a brake job, this article will break down the factors that influence the cost and provide you with a general price range.
What Does a Brake Job Include?
A brake job typically involves inspecting, repairing, or replacing components of your vehicle's braking system. For a Honda CR-V, this may include:
- Replacing brake pads
- Resurfacing or replacing brake rotors
- Inspecting and possibly replacing brake calipers
- Flushing and replacing brake fluid
The exact services required will depend on the condition of your braking system and whether you're addressing routine wear and tear or a specific issue.
Factors That Affect the Cost of a Brake Job
The cost of a brake job can vary based on several factors, including:
- Type of Brake Pads: Ceramic brake pads are more expensive than semi-metallic or organic pads but offer better performance and longevity.
- Condition of Rotors: If your rotors are in good shape, they may only need resurfacing, which is cheaper than replacing them.
- Labor Costs: Labor rates vary by location and shop. For example, urban areas often have higher labor costs than rural areas.
- OEM vs. Aftermarket Parts: Original Equipment Manufacturer (OEM) parts are typically more expensive than aftermarket options but may provide better compatibility and performance.
Typical Cost Range for a Honda CR-V Brake Job
On average, a brake job for a Honda CR-V can cost anywhere from $250 to $400 per axle for standard brake pad replacement and rotor resurfacing. If rotor replacement is required, the cost may increase to $400 to $600 per axle. Here’s a breakdown:
- Brake Pads Only: $100 to $200 per axle
- Brake Pads and Rotor Resurfacing: $250 to $400 per axle
- Brake Pads and Rotor Replacement: $400 to $600 per axle
Keep in mind that these are general estimates and may vary depending on your location, the shop you choose, and the specific condition of your vehicle.
When Should You Get a Brake Job?
It’s important to address brake issues promptly to ensure your safety on the road. Signs that you may need a brake job include:
- Squealing or grinding noises when braking
- A vibrating or pulsating brake pedal
- Reduced braking performance
- A brake warning light on your dashboard
If you notice any of these symptoms, schedule an inspection with a trusted auto repair shop as soon as possible.
Why Choose Kevin's Autos for Your Brake Job?
At Kevin's Autos, we pride ourselves on providing reliable and affordable auto repair services. With years of experience servicing vehicles like the Honda CR-V, we ensure that your brake job is done right the first time. Our team uses high-quality parts and offers competitive pricing to give you peace of mind on the road.
Contact us today to schedule your brake service or to get a personalized quote for your Honda CR-V!
Frequently Asked Questions
Is it cheaper to replace front or rear brakes?
On average, expect to spend $600 to $1,000 to have the brake pads and rotors replaced on one axle. On most vehicles, the front brakes are cheaper to replace than the rear. If you were to have both axles done, it might cost $1,000 to $2,000.
How to check CRV brakes?
Carefully remove the wheel to expose the brake rotor and caliper which houses the brake pad. Through the hole in the caliper you will see both the inboard pad (or inside pad) and outboard pad (or outer pad). Measure the thickness levels of your brake pads with a brake measuring gauge, Vernier caliper, or compass.
How much should I pay someone for doing my brakes?
Professional Repair Costs
This typically includes between $35 and $150 for the brake pads themselves and around $80 to $120 for labor per axle. If you're replacing rotors along with the pads, the cost increases to between $250 and $500 per axle.
How to tell if rotors are bad?
Some common symptoms of bad rotors include vibration or pulsation in the steering wheel, high-pitched squealing noise when braking, shaking steering wheel, brake pedal pulsing, vehicle taking a long time to stop, loud bangs while braking, large edges on the outer part of the brake rotor, and scratch marks on the rotor.
How long do Honda factory brakes last?
The average lifespan of Honda brakes is 25,000 and 65,000 miles, but your driving habits, where you drive, and what kind of brake pads your vehicle uses will lead to some variation. Keeping that in mind, we've put together a guide of average brake life and the factors affecting it.
How long should brakes last on a Honda CR V?
between 25,000 and 65,000 miles
Average Life Span of Honda Brake Pads
On average, Honda brake pads last between 25,000 and 65,000 miles.
How much does it cost to replace brakes on a Honda CRV?
Honda CRV brake pads replacement, which includes parts and labor, can cost anywhere between $150 and $300 per axle depending on the type of brake pads desired and the extent of the damage your previously worn down pads have caused to the other components of your vehicle such as the rotors.
How much should a full brake job cost?
A complete brake repair that includes pads, rotors, and calipers typically averages between $200 and $800 depending on the vehicle and parts used.
How much does Honda charge to change brakes and rotors?
How much does Honda charge to replace brakes? On average Honda dealerships charge 910-$1050 to replace brakes this includes a complete Honda rotor and brake pad replacement. At Brakes To Go, on average we only charge 750-$880 plus we come to you to replace your Honda brakes.
How much do dealers charge to change brakes?
The cost of replacing brake pads can vary depending on where the work is being done. Replacing brake pads at a dealership can be the most expensive option, with costs ranging from $500 to $1000 or more. Independent mechanics typically charge less, with prices ranging from $200 to $500.
