How much transmission fluid does a 10R80 hold?
The 10R80 is a 10-speed automatic transmission co-developed by Ford and General Motors, commonly found in vehicles like the Ford F-150, Ford Mustang, and other models. Proper maintenance of your transmission, including ensuring the correct amount of transmission fluid, is crucial for optimal performance and longevity. In this article, we’ll explore how much transmission fluid the 10R80 holds and provide tips for maintaining your transmission.
Transmission Fluid Capacity of the 10R80
The 10R80 transmission has a total fluid capacity of approximately 13 quarts (12.3 liters). However, it’s important to note that during a standard transmission fluid change, you may only replace about 5-7 quarts, as the remaining fluid stays in the torque converter and other components. A complete flush is required to replace the full capacity.
Why Is Transmission Fluid Capacity Important?
Maintaining the correct transmission fluid level is essential for several reasons:
- Lubrication: Transmission fluid reduces friction and wear on internal components.
- Cooling: It helps dissipate heat generated during operation, preventing overheating.
- Hydraulic Function: The fluid enables the transmission to shift gears smoothly by providing hydraulic pressure.
- Longevity: Proper fluid levels and quality extend the life of your transmission.
How to Check and Add Transmission Fluid
To ensure your 10R80 transmission operates efficiently, follow these steps to check and add transmission fluid:
- Park the vehicle on a level surface and engage the parking brake.
- Start the engine and let it idle until it reaches normal operating temperature.
- Shift through all the gears, then return to "Park" or "Neutral."
- Locate the transmission dipstick (if equipped) or the fill plug on the transmission pan.
- Check the fluid level and condition. The fluid should be within the recommended range and have a clean, reddish color.
- If fluid is low, add the manufacturer-recommended transmission fluid type (e.g., Mercon ULV for Ford vehicles with the 10R80) in small increments, rechecking the level after each addition.
When to Change Transmission Fluid
Ford generally recommends changing the transmission fluid in the 10R80 every 150,000 miles under normal driving conditions. However, if you frequently tow heavy loads, drive in extreme temperatures, or engage in stop-and-go traffic, consider changing the fluid more frequently, such as every 60,000-80,000 miles.
Final Thoughts
Understanding the transmission fluid capacity and maintenance requirements of your 10R80 transmission is key to keeping your vehicle running smoothly. If you’re unsure about performing a fluid change or checking the levels yourself, don’t hesitate to visit a trusted auto repair shop like Kevin’s Autos. With years of experience in car maintenance and repair, we’re here to help you keep your vehicle in top condition.
Frequently Asked Questions
How many quarts of transmission fluid do I need for a Ford F-150?
Capacities and Specifications
| Item | Capacity |
|---|---|
| Automatic transmission fluid. | 14.1 qt (13.3 L)1 |
| Transfer case fluid. | 1.5 qt (1.4 L) |
| Windshield washer fluid. | Fill as required |
| Fuel tank (super cab). | 26.0 gal (98.4 L) |
How often should you change the transmission fluid in a Ford 10 speed?
once every 30,000-60,000 miles
Typically, a Ford F-150 requires a transmission fluid change once every 30,000-60,000 miles. Since many drivers only add 12,000 miles to the odometer annually, you can expect to need a transmission fluid change only once every few years.
What kind of transmission fluid does a Ford 10 speed take?
ULV ATF
ULV ATF is a full-synthetic, ultra-low viscosity transmission fluid for the latest General Motors and Ford automatic transmission with 9 and 10 speed gears, specifically recommended for Ford/GM 10R80 and select Ford F-150 and Raptor trucks.
How much transmission fluid does a 2018 Ford f150 10 speed hold?
Capacity: 10 speed 10R80 Total Fill 13.1 quarts.
How much oil does a 10 speed Eaton Fuller transmission hold?
26 pints
Oil Capacity: 10-speed: Approx. 26 pints [12 liters]. Integral oil pump available. Pump standard on 1450, 1650 and 1850 series.
How much fluid does a 10 speed transmission hold?
The capacity is 11 to 12 liters. If you run it, keep an eye on your transmission temperature.
How much fluid does a 10R80 take?
According to the Ford manual, total fluid capacity for this unit is 12.7 quarts (12L) of Mercon ULV.
What kind of transmission fluid does a 97 Ford f150 take?
Automatic Transmission Fluid
4 speed 4R70W Total Fill 13.9 quarts.
How many quarts of transmission fluid does a Ford V10 take?
Automatic Transmission Fluid
Capacity: 4 speed 26 Plate OAC 4R100 Total Fill 17.6 quarts.
How many quarts is a 10R80 transmission?
13 qts. Weight (kg / lbs.)
