How much transmission fluid does a 2005 Dodge Dakota 4.7 L take?
For a 2005 Dodge Dakota with the 4.7 L engine, a full automatic transmission fluid change typically requires about 13 quarts, while a standard pan drain and fill uses around 8–9 quarts. Exact capacity depends on the specific transmission variant and whether a torque-converter drain is performed.
Understanding the Dakota’s transmission setup
The 2005 Dakota with the 4.7 L V8 is paired with a four‑speed automatic transmission. Capacity can vary slightly depending on the exact transmission family (for example, variants within the 4R/42RLE family versus other autowarrant configurations) and the size of the pan. Always verify with the factory service manual or a VIN-specific specification to ensure precise quantities for your truck.
Capacities by service type
These figures reflect common service scenarios for the Dakota's automatic transmission and should be treated as guidelines. Actual amounts may vary by transmission variant and the presence of a deeper pan or aftermarket components.
- Complete fluid change (pan drop, new filter, and, if possible, torque-converter drain): about 12–14 quarts (roughly 11–13 L), with 13 quarts being a typical target.
- Pan drain and fill only (no torque-converter drain): about 8–9 quarts (approximately 7.5–8.5 L).
- If you perform a separate torque-converter drain in addition to the pan drop: add roughly 2–4 quarts (about 1.9–3.8 L), bringing total toward 10–12 quarts.
In practice, most DIYers plan for 9–13 quarts during a routine service and keep a little extra on hand for topping up after the initial fill.
ATF type and compatibility
Using the right ATF is essential for proper shifting, cooling, and wear life. For most 4.7 L Dodges of this era, Dexron VI is the recommended specification, and it is generally backward-compatible with older Dexron types. Always confirm with the owner's manual or a repair manual for your VIN, and use a fluid that meets Chrysler MS-9602 where applicable.
- Dexron VI is typically recommended for this transmission family.
- Dexron II/III fluids may be compatible in some cases, but Dexron VI is preferred for newer units and for longer service life.
- Avoid Type F or fluids not approved for Chrysler automatics unless explicitly recommended by the manual.
Choosing the correct ATF ensures optimal performance and longevity. When in doubt, opt for Dexron VI that meets the OEM specification for your truck.
Summary
Bottom line: plan on roughly 8–9 quarts for a simple pan drain and fill, and about 12–14 quarts for a full fluid change that includes the filter and, if possible, a torque-converter drain. Confirm the exact capacity for your VIN with the service manual, and use the recommended Dexron VI ATF. Always have a little extra ATF on hand for topping off after the service.
What kind of transmission fluid for a 2005 Dodge Dakota?
The 2005 Dodge Dakota uses ATF+4 automatic transmission fluid, though it's best to check your owner's manual to be certain. For manual transmissions, GL-4 or GL-5 gear oil is recommended.
Automatic transmission
- Fluid type: ATF+4 is specifically formulated for Chrysler and DaimlerChrysler transmissions.
- Official licensing: Many brands, such as Valvoline, are officially licensed and approved for ATF+4 applications.
- Backwards compatibility: ATF+4 is compatible with transmissions that call for older fluids like ATF+3 or ATF+2.
- Recommendation: Always check your owner's manual for the most accurate fluid specification for your specific vehicle.
Manual transmission
- Fluid type: Check your owner's manual for the specific recommendation between GL-4 and GL-5, depending on your transmission's specifications.
How many quarts of transmission fluid does a 2005 Dodge Dakota take?
The total fill requirement for the four-speed automatic transmission is 8.8 qts., and 17 qts. with the five-speed unit. Automatic Transmission Mopar ATF+4, Automatic Transmission Fluid. Manual Transmission (Getrag 238) Mopar ATF+4, Automatic Transmission Fluid.
How many quarts does a 4.7 l Dodge Dakota take?
Engine Oil
Capacity: 6 quarts (with filter).
How much transmission fluid does a 2004 Dodge Dakota 4.7 take?
Automatic Transmission Fluid
Capacity: 4 speed 42RLE Total Fill 8.8 quarts. Capacity: 4 quarts Initial Fill.
