How much transmission fluid does a 2014 Subaru Crosstrek take?
As a car owner, understanding the maintenance needs of your vehicle is crucial for its longevity and performance. One of the essential aspects of vehicle maintenance is ensuring that the transmission fluid is at the correct level. In this article, we will explore how much transmission fluid a 2014 Subaru Crosstrek requires and why it is important to keep it topped up.
Transmission Fluid Capacity for the 2014 Subaru Crosstrek
The 2014 Subaru Crosstrek typically requires approximately 6.9 quarts (or about 6.5 liters) of transmission fluid when performing a complete fluid change. This amount may vary slightly depending on the specific model and whether the fluid is being drained from the transmission pan or if the entire system is being flushed.
Importance of Transmission Fluid
Transmission fluid plays a vital role in the operation of your vehicle's transmission system. Here are some key functions of transmission fluid:
- Lubrication: It lubricates the moving parts within the transmission, reducing friction and wear.
- Cooling: It helps to dissipate heat generated during the operation of the transmission.
- Hydraulic Function: Transmission fluid provides the necessary hydraulic pressure to engage gears and operate clutches.
- Contaminant Removal: It helps to carry away debris and contaminants, keeping the transmission clean.
Checking and Maintaining Transmission Fluid Levels
Regularly checking your transmission fluid levels is essential to ensure your vehicle operates smoothly. Here are some steps to check and maintain your transmission fluid:
- Park your vehicle on a level surface and let the engine run until it reaches normal operating temperature.
- Locate the transmission dipstick, usually found near the back of the engine bay.
- Pull out the dipstick, wipe it clean, and reinsert it to get an accurate reading.
- Check the fluid level against the markings on the dipstick. If it's low, add the recommended transmission fluid.
- Inspect the fluid's color and smell; it should be a bright red and not have a burnt odor. If it appears dark or smells burnt, consider a fluid change.
Conclusion
Maintaining the correct level of transmission fluid in your 2014 Subaru Crosstrek is crucial for its performance and longevity. By ensuring that you have the right amount of fluid and keeping it clean, you can help prevent costly repairs down the line. If you're unsure about checking or changing your transmission fluid, don't hesitate to consult a professional mechanic for assistance.
Frequently Asked Questions
How much is a transmission fluid change for a Subaru crosstrek?
The average cost for a Subaru Crosstrek Transmission Fluid Change is between $42 and $52 but can vary from car to car.
How many quarts does a 2014 Subaru Crosstrek take?
Oil Grade: SM
| Viscosity: | 0W-20 (All TEMPS) |
|---|---|
| Capacity: | 5.1 quarts (with filter). After refill check oil level. |
| Torque: | 31 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. Only use an OE drain plug. |
| Notes: | (1) Synthetic oil is required. |
How much is a transmission fluid change for a Subaru Crosstrek?
The average cost for a Subaru Crosstrek Transmission Fluid Change is between $42 and $52 but can vary from car to car.
What kind of transmission fluid does a 2014 Subaru Crosstrek take?
FRAM – Full Synthetic Continuously Variable Transmission (CVT) Fluid: 1 Quart (Part No. F490)
How much fluid does a CVT transmission hold?
That takes 7 1/4 quarts. Make sure to use Genuine NISSAN CVT Fluid NS-3 only.
How often to change CVT transmission fluid Subaru Crosstrek?
every 30,000 to 60,000 miles
Follow Subaru's Recommendations
Subaru often suggests changing the transmission fluid at regular intervals, such as every 30,000 to 60,000 miles, depending on the model and transmission type.
How many quarts of transmission fluid does a 2014 Subaru Outback take?
12-8 Specifications/Specifications & Fluids Fluid type*1 Fluid Automatic transmission fluid (5AT models) Fluid capacity*2 · SUBARU ATF · IDEMITSU ATF HP 10.4 US qt (9.8 liters, 8.6 Imp qt) “Automatic transmission fluid” F11-20 variable 13.1 US qt (12.4 liters, 10.9 Imp qt) “Continuously F11-21 transmission fluid” ...
How many quarts does a Subaru CVT transmission take?
between 6-7 quarts
How many quarts of oil does the transmission take? Hello! if you do a drain and fill, it usually takes between 6-7 quarts. I would have 8 on hand to be on the safe side!
How many quarts of transmission fluid do I need for a change?
Drivers can expect to pay $125 to $250 for a transmission fluid flush service. This is approximately twice as much as a transmission fluid change. This is due in large part to the additional fluid required. A flush will take 12 to 22 quarts, while a fluid change requires 5 to 7 quarts.
How many quarts of transmission fluid does a Subaru Crosstrek take?
Capacity: TR580 Total Fill 11.3 quarts.
