How much transmission fluid does a Ford F250 Super Duty take?
The Ford F250 Super Duty, a popular heavy-duty pickup truck, requires a specific amount of transmission fluid to function properly. According to the manufacturer's recommendations, the F250 Super Duty takes approximately 6 to 8 quarts of transmission fluid, depending on the specific model and transmission type.
Transmission Fluid Capacity for the Ford F250 Super Duty
The exact transmission fluid capacity for a Ford F250 Super Duty can vary depending on several factors, including the model year, engine size, and transmission type. Here are the typical transmission fluid capacities for the Ford F250 Super Duty:
- 6.2L V8 engine with 6-speed automatic transmission: 6 quarts
- 6.7L V8 diesel engine with 6-speed automatic transmission: 6 quarts
- 6.7L V8 diesel engine with 10-speed automatic transmission: 8 quarts
It's important to note that these are the recommended capacities, and the actual amount of transmission fluid needed may vary slightly depending on the specific vehicle and any modifications or repairs that have been made.
Importance of Proper Transmission Fluid Levels
Maintaining the correct transmission fluid level is crucial for the proper functioning and longevity of the Ford F250 Super Duty's transmission. Insufficient fluid can lead to increased wear and tear on the transmission components, while overfilling can cause leaks and other issues. It's recommended to check the transmission fluid level regularly and top it up as needed, following the manufacturer's instructions.
Replacing Transmission Fluid
In addition to checking the fluid level, it's also important to replace the transmission fluid at the recommended intervals, which can vary depending on the vehicle's usage and the manufacturer's recommendations. For the Ford F250 Super Duty, the transmission fluid should typically be replaced every 30,000 to 60,000 miles, or as specified in the owner's manual.
By maintaining the proper transmission fluid level and replacing it at the recommended intervals, you can help ensure the smooth and reliable operation of your Ford F250 Super Duty for years to come.
How much transmission fluid does a 2013 f250 6.7 hold?
16.3 qt
Capacities and Specifications - 6.7L Diesel
| Item | Capacity |
|---|---|
| Automatic Transmission Fluid | 16.3 qt (15.4 L)4 |
| Front axle wheel bearing oil (8500 lb axle) | 6–7 fl oz (177–207 ml) |
| Front axle wheel bearing oil (all except 8500 lb axle) | 12–13 fl oz (355–385 ml) |
| Rear axle (S-140)(13.5k, 17.5k, 19k single speed) | 19 pt (9.0 L)4 |
What type of transmission fluid does a Ford F250 Super Duty use?
FRAM – FRAM Full Synthetic Dexron VI Automatic Transmission Fluid, 1 Quart (Part No. F426)
How many quarts does a 6.7 powerstroke transmission take?
The 6.7 Powerstroke transmission fluid capacity varies by model year, but it is approximately 16.3–17.4 quarts for the 6R140 6-speed (2017-2019) and 18.2 quarts for the 10R140 10-speed (2020-2025) when performing a dry fill. A basic drain and fill typically requires about 8 quarts of fluid for the 6R140 transmission.
6R140 (6-speed automatic)
- Dry fill capacity: 16.3–17.4 quarts
- Drain and fill capacity: Around 8 quarts
- Fluid type: Mercon LV
10R140 (10-speed automatic)
- Dry fill capacity: 18.2 quarts
- Fluid type: Mercon ULV
Important considerations
- Fluid type: Always use the specific fluid recommended for your year and transmission type (e.g., Mercon LV for 6R140, Mercon ULV for 10R140).
- Drain and fill vs. dry fill: The amount of fluid needed varies greatly depending on whether you are just draining and refilling or performing a full dry fill (which includes the torque converter).
- Aftermarket pans: If you have an aftermarket transmission pan, the capacity will be different. Some deep pans can add up to 8 quarts of capacity.
How many quarts of transmission fluid does a F250 Super Duty take?
The Ford F-250 transmission fluid capacity varies by model year and engine, but a full service for most models is around 17–18 quarts for a total fill, while a basic pan-drop service requires about 8–12 quarts. Always refer to your owner's manual for the exact specification, as capacity depends on the specific transmission (e.g., 6R140, 4R100) and whether the torque converter is included in the refill.
This video shows how to check the transmission fluid level after it's been changed: 1mAutomotive InsightYouTube · Nov 5, 2023
Capacities by transmission type
- 6R140 Automatic (6.2L Gas): 16.5 L (approximately 17.4 quarts) for a total fill.
- 6R140 Automatic (6.7L Diesel): 16.5 L (approximately 17.4 quarts) for a total fill.
- 10R140 Ten-Speed Automatic: Approximately 18.2 qt (17.2 L).
- 4R100 Automatic (e.g., 7.3L Diesel): Approximately 17.6 quarts for a total fill.
Capacities for pan-drop service
- 6R140: Approximately 8.2 quarts for an initial fill after a pan-drop service.
- 4R100: Around 6–7 quarts for a pan drop and filter change.
- Older models (e.g., 2000-2001): Around 12 quarts for a pan-drop and filter change.
Important considerations
- Check the dipstick: For a pan-drop, add the new fluid gradually while checking the level with the engine warm and running in park or neutral. Do not overfill, as this can cause leaks and damage the transmission.
- Use the correct fluid: Always use the manufacturer-recommended fluid type. For many modern F-250s, this is MERCON ULV or MERCON V for older models.
- Consult your manual: The most accurate information will always be in your owner's manual.
