How much weight can a 2013 Toyota Tundra carry in the bed?

The bed load is not published as a separate figure by Toyota. For the 2013 Tundra, total payload capacity typically falls roughly in the 1,350–1,750 pounds range, depending on configuration. To determine how much you can carry specifically in the bed, subtract the weight of any passengers and installed equipment from the truck’s payload. For an exact figure, consult the door‑jamb GVWR sticker or the owner's manual for your exact build.

Payload basics: what the numbers mean

The payload rating is the maximum combined weight of passengers, cargo and accessories the vehicle can safely carry. It does not distinguish cargo location; the bed’s allowable weight is the portion of this total that remains after accounting for occupants and installed equipment.

Typical configuration factors for the 2013 Tundra

Below is a quick look at how configuration can influence payload. The numbers vary by engine, cab style, bed length and options; the values here are representative ranges and not exact for any individual vehicle.

• Cab style (Regular vs. Double Cab vs. CrewMax)


• Bed length (short/standard vs. long)


• Drivetrain and engine choice (2WD/4WD; 4.0L V6 vs. 5.7L V8)


• Towing and heavy option packages

In practice, this means the exact payload—and therefore the amount you can load in the bed—depends on your truck’s specific build. To know your exact limit, consult the GVWR sticker on the door jamb and check the curb weight listed in the owner’s manual.

How to estimate bed cargo capacity for your Tundra

There is no published bed-only figure; the bed load is the portion of payload available after subtracting any occupants and added equipment. Use this step-by-step method to estimate your bed capacity.

• Find the GVWR (Gross Vehicle Weight Rating) listed on the door jamb sticker or owner’s manual.


• Find the curb weight (the weight of the truck with standard equipment, no passengers or cargo).


• Compute the payload capacity: GVWR minus curb weight.


• Subtract the estimated weight of occupants (driver plus passengers).


• Subtract any hitch weight or other installed, weighty accessories that count toward payload.

These steps yield a working bed-cargo figure for a given trip. Exceeding it can affect braking, handling, tire load and safety, and could impact warranty coverage.

Practical loading and safety tips

Carrying cargo safely in the bed of a 2013 Tundra requires attention to distribution, securing and awareness of vehicle limits. The following guidelines help keep loads safe on the road.

• Distribute weight evenly from side to side and keep heavy items low to the floor of the bed.


• Secure all cargo with rated tie-downs or straps; use anchor points recommended by Toyota.


• Avoid loading above the bed rails; consider a bed cap or racks for tall items.


• Be mindful of hitch weight and overall vehicle balance when towing or carrying heavy loads.


• Remember that payload includes all loads: passengers, cargo, hitch, and any aftermarket equipment.

Following these practices helps ensure safe handling and preserves components like suspension, brakes and tires.

Summary

In summary, the 2013 Toyota Tundra does not publish a separate bed-only cargo rating. The vehicle’s payload typically ranges around 1,350–1,750 pounds, depending on configuration. To determine how much you can safely carry specifically in the bed, calculate your vehicle’s payload and subtract the weight of occupants and any heavy hitch or equipment. Always verify with the door-jamb GVWR sticker and consult the owner's manual for your exact build.

How much weight can a 2013 Toyota Tundra bed hold?

4x2 4.6L V8 Standard Bed rated for 1410-lb. 4x2 4.6L V8 Standard Bed rated for 1635-lb. CREWMAxMANPOWER MEETS HORSEPOWER.
PDF

What is the life expectancy of a 5.7 Tundra?

A Toyota Tundra with the 5.7L engine can last between 200,000 and 300,000 miles, but with excellent maintenance, many owners report reaching 300,000, 400,000, or even over 500,000 miles. Some have even surpassed one million miles, showing that while mileage can vary, proper care is the most significant factor in the engine's longevity. 
Factors affecting lifespan

• Maintenance: Regular and meticulous maintenance, especially fluid changes (coolant and transmission), is the most crucial factor for longevity. 
• Driving habits: Consistent, moderate driving will extend life, but the engine can handle occasional hard use. 
• Potential issues: Some owners report issues with leaks (timing cover, valley plate, valve covers) or head gaskets before 200,000 miles, but these can be mitigated with good maintenance. 
• Timing chain: The 5.7L engine uses a timing chain, which is more durable than a timing belt and is a significant factor in the engine's high-mileage potential. 

What owners recommend

• Regular fluid and filter changes: Prioritize changing fluids like transmission fluid and coolant according to the owner's manual or even more frequently. 
• Perform basic maintenance: Simple tasks like cleaning the vehicle's brake pins can prevent larger issues later. 
• Check vehicle history: When buying used, review the vehicle's history report to ensure maintenance was performed consistently. 

What year was the worst year for Toyota Tundra?

The worst model years for the Toyota Tundra are generally considered to be 2007 and 2012, due to significant engine and transmission issues. The 2007 model has the highest number of total complaints, while the 2012 model is singled out for its expensive engine and transmission problems occurring at lower mileage. Other years to consider avoiding include the first-generation 2005 and 2008 models, and the newer 2022 and 2023 models, which have reliability concerns with their new twin-turbo engine. 
Problem years to avoid

• 2007: This year has the highest number of overall complaints, with issues like air injection pump failure, piston slap, and engine problems. 
• 2012: Labeled the "worst model year" by some sources, this year is notorious for expensive engine and premature transmission issues that can occur at lower mileage. 
• 2005-2008: The entire first generation of the second model series has a high number of complaints, with 2005 and 2007 being the most problematic within that range. 
• 2022 and 2023: The new generation's first model years have faced reliability issues with the new twin-turbo V6 engine, leading to engine failure recalls. 

Specific issues in problem years

• 2007: Faulty air injection pump, engine knocking, and other engine-related complaints. 
• 2012: Expensive engine issues (like a faulty air induction pump that can cost over $3,000 to fix) and premature transmission problems that can start around 9,000 miles. 
• 2005: Problems with the drive system, including the CV joint and front differential. 
• 2022-2023: Engine failures linked to the new twin-turbo V6 engine. 

How much weight can a Tundra hold in the bed?

The Toyota Tundra's maximum payload capacity varies by model, ranging from around 1,485 to 1,940 pounds for recent model years. The specific capacity depends on the vehicle's configuration, such as the trim level and other options, with some models like the 2024 SR and SR5 reaching the upper end at 1,940 pounds. It is essential to check the specific payload rating on the sticker inside the driver's side door for your exact vehicle, as this number includes the weight of occupants and cargo.
 
Payload capacity by model year

• 2025 Tundra: Up to 1,940 pounds
• 2024 Tundra: Up to 1,940 pounds
• 2023 Tundra: Up to 1,940 pounds
• Varies by configuration: Payload can range from approximately 1,485 to 1,940 pounds depending on the trim and options. 

How to find your Tundra's exact payload

• Check the door sticker: The most accurate way to determine your Tundra's payload capacity is to look at the safety and loading sticker inside the driver's side door.
• Understand the sticker: The payload rating on the sticker is the maximum combined weight for both the occupants and any cargo you place in the truck bed or cab.