How to check transmission fluid Lexus IS250 2007?
Checking the transmission fluid level in your 2007 Lexus IS250 is an important maintenance task that should be performed regularly to ensure the proper functioning of your vehicle's transmission. This article will provide a step-by-step guide on how to check the transmission fluid in your Lexus IS250.
Preparing to Check the Transmission Fluid
Before you begin, make sure your Lexus IS250 is parked on a level surface and the engine is warm, as this will ensure an accurate reading of the fluid level. You'll also need the following tools:
- Transmission fluid dipstick
- Clean, lint-free cloth
- Transmission fluid (if needed)
Consult your owner's manual to determine the recommended transmission fluid type and quantity for your Lexus IS250.
Checking the Transmission Fluid Level
Follow these steps to check the transmission fluid level in your 2007 Lexus IS250:
- Engage the parking brake and place the transmission in Park (P).
- Start the engine and let it run for a few minutes to warm up the transmission fluid.
- Locate the transmission fluid dipstick, which is usually located near the front of the engine compartment.
- Carefully pull out the dipstick and wipe it clean with the lint-free cloth.
- Reinsert the dipstick all the way back into the transmission and then pull it out again.
- Check the fluid level on the dipstick. The fluid should be between the "MIN" and "MAX" marks on the dipstick.
If the fluid level is below the "MIN" mark, you'll need to add more transmission fluid. Refer to your owner's manual for the recommended fluid type and quantity.
Adding Transmission Fluid
If the transmission fluid level is low, follow these steps to add more fluid:
- Locate the transmission fluid fill plug, which is usually located on the side of the transmission housing.
- Using a wrench, carefully remove the fill plug.
- Slowly pour in the recommended transmission fluid, checking the dipstick frequently to avoid overfilling.
- Once the fluid level is between the "MIN" and "MAX" marks on the dipstick, replace the fill plug and tighten it securely.
After adding fluid, recheck the level to ensure it's within the proper range. If the fluid level is still low, you may need to have your transmission serviced by a professional.
Regularly checking and maintaining the transmission fluid level in your 2007 Lexus IS250 is an important part of keeping your vehicle in top condition. By following the steps outlined in this article, you can ensure your transmission is properly lubricated and functioning correctly.
How much transmission fluid does a 2007 Lexus IS250 take?
The 2007 Lexus IS250 automatic transmission fluid capacity is approximately 7.6 quarts for a total fill, while a single drain and refill typically requires around 2 quarts. For the manual transmission, the capacity is about 1.9 US quarts (1.8 liters).
You can watch this video to learn how to change the transmission fluid: 53sS&E's GarageYouTube · Sep 12, 2024
Automatic transmission (A960E)
- Total fill capacity: 7.6 quarts
- Initial fill/drain and refill capacity: 2 quarts
- Fluid type: Toyota ATF WS (World Standard)
Manual transmission (Aisin)
- Total fill capacity: 1.9 US quarts (1.8 liters)
- Fluid type: API GL-5 SAE 75W-90 gear oil
This video demonstrates how to refill the transmission fluid in a Lexus IS250: 49sChristian MastrileYouTube · Aug 13, 2024
How do you check the transmission fluid on a Lexus IS250?
To check the Lexus IS250 transmission fluid level, you must first locate the sealed transmission, as there is no dipstick. The process requires the vehicle to be level, running, and at a specific operating temperature of approximately 113−117113 minus 117113−117 degrees Fahrenheit. You will need tools to access the overflow plug and a method to verify the temperature (like an OBD-II scan tool or an infrared thermometer).
You can watch this video to learn how to check the transmission fluid level on a Lexus IS250: 1mBuilt for SpeedYouTube · Aug 14, 2021
Before you begin
- Ensure the vehicle is parked on a level surface.
- Have the necessary tools ready: a 5mm Allen key for the level plug, a 24mm socket for the fill plug, and a 14mm socket for the drain plug. You'll also need a temperature-reading tool, like a scan tool or an infrared thermometer.
- Note the fill and drain plug locations. The fill plug is on the driver's side, and the drain and level plugs are on the transmission pan itself. It's best to open the fill plug first to prevent being unable to refill the transmission later if you open the drain plug and it's stuck.
Step-by-step guide
- Start the engine and let it run.
- Slowly shift through all gears, holding each for a few seconds, then return to Park (P).
- Drive the car to warm up the transmission to approximately 113−117113 minus 117113−117 degrees Fahrenheit. Use your scan tool to check the exact temperature, or use an infrared thermometer on the transmission pan.
- Once at temperature, park the car on the level surface and leave the engine running.
- Go under the vehicle and locate the level plug (usually on the side of the transmission pan). It may require a 5mm Allen key to open.
- Carefully remove the level plug. The correct amount of fluid is present if the fluid only trickles out and then stops.
- If fluid pours out, the transmission is overfilled and needs to have the excess drained. If nothing comes out, you may need to add fluid.
- If adding fluid, use a 24mm socket to open the fill plug, add the new fluid, and recheck the level.
- Once the level is correct (dripping is constant), reinsert the level plug.
How to check Lexus transmission fluid level?
Just to the right of the Lexus. Logo. Like that then your transmission dipstick is right here the red one it's got a little clip on it so you move the clip over to pull it. Out.
Does a Lexus have a transmission dipstick?
So there is a very specific procedure that needs to be followed to fill the transaxle to the correct. Level. The correct level is very sensitive to the temperature of the fluid.
