How to do Honda TPMS calibration?
As a car owner, understanding the Tire Pressure Monitoring System (TPMS) is crucial for maintaining your vehicle's safety and performance. Honda vehicles are equipped with a TPMS that alerts you when tire pressure is too low, which can lead to unsafe driving conditions. This article will guide you through the steps to calibrate the TPMS in your Honda, ensuring that your system functions correctly and keeps you informed about your tire health.
What is TPMS Calibration?
TPMS calibration is the process of resetting the tire pressure monitoring system after tire rotation, replacement, or when the tire pressure has been adjusted. Proper calibration ensures that the system accurately reflects the current tire pressures and alerts you only when necessary.
Steps to Calibrate Honda TPMS
Follow these steps to successfully calibrate the TPMS in your Honda:
- Check Tire Pressure: Before starting the calibration, ensure that all tires are inflated to the recommended pressure levels. You can find this information on the driver’s side door jamb or in the owner’s manual.
- Turn on the Ignition: Insert the key into the ignition and turn it to the "ON" position without starting the engine.
- Locate the TPMS Reset Button: This button is usually found beneath the steering wheel or on the dashboard. Refer to your owner’s manual for the exact location.
- Press and Hold the TPMS Reset Button: Hold the button until the TPMS indicator light blinks three times, then release it. This indicates that the system is resetting.
- Drive the Vehicle: After resetting, drive your Honda for about 10-15 minutes at speeds above 30 mph. This allows the TPMS to recalibrate and recognize the new tire pressures.
- Check the TPMS Light: After driving, the TPMS light should turn off if the calibration was successful. If it remains on, repeat the process or consult a professional.
When to Calibrate TPMS
It's essential to calibrate your TPMS in the following situations:
- After changing or rotating tires.
- When you replace a tire or install a new set of tires.
- After adjusting tire pressures significantly.
- If the TPMS warning light remains illuminated after checking tire pressures.
Conclusion
Regularly calibrating your Honda's TPMS is vital for ensuring your safety on the road. By following these simple steps, you can maintain accurate tire pressure readings and enhance your vehicle's performance. If you encounter any issues during the calibration process, don't hesitate to reach out to a professional auto service for assistance.
Frequently Asked Questions
Does Honda TPMS reset automatically?
Honda TPMS Reset Tool
Whenever you add air to your tires, the Honda low-pressure tire light should go off on its own. If it remains on, follow the steps below to access your Honda TPMS reset tool to get safely back on the Newark roads.
Can you program TPMS yourself?
Follow the on-screen instructions on the TPMS tool to program each sensor to the vehicle's TPMS system. This process may involve inputting new sensor IDs or copying the old sensor's ID to the new sensor. Top of the line scan tools like Autel allow for "auto creation" where it takes care of all this automatically.
Do Honda TPMS sensors need to be programmed?
Every replacement TPMS sensor must be “relearned” to the vehicle following the prescribed OE relearn procedure, regardless of whether it is an OE or aftermarket sensor.
How do I calibrate my Honda TPMS?
Within a few miles of driving. See your vehicle's owner's manual for even more. Details. You can download one at my garage.honda.com.
How long does TPMS calibration take on a Honda?
approximately 30 minutes
Any time you inflate, change, or rotate one or more of the tires, you need to recalibrate the system. The calibration process requires approximately 30 minutes of cumulative driving at speeds between 30–65 mph (48–105 km/h). The vehicle must be stopped to begin calibration, and the process finishes automatically.
Will my TPMS reset itself?
Direct TPMS systems reset automatically after tire inflation or rotation. You do need to have these sensors resynchronized when you get new tires, which requires a special tool.
Can you program TPMS sensors yourself?
Follow the on-screen instructions on the TPMS tool to program each sensor to the vehicle's TPMS system. This process may involve inputting new sensor IDs or copying the old sensor's ID to the new sensor. Top of the line scan tools like Autel allow for "auto creation" where it takes care of all this automatically.
Why is my tire pressure light still on after filling tires on my Honda?
Step the calibration. Process will finish automatically within a few miles of driving. See your vehicle's owner's manual for more details or go to owners.honda.com for a downloadable.
How do I program my Honda TPMS?
Models with steering wheel buttons:
- Press MENU.
- Select Customize Settings.
- Select TPMS Calibration.
- Select Initialize.
- Select Yes.
- Press MENU to exit.
Why is my TPMS light on but all my tires are fine?
One of the most common reasons for a TPMS light staying on despite the tires being properly inflated is a sensor malfunction. TPMS sensors are typically located inside the tire and can wear out or become damaged over time, particularly if you've hit a curb, driven through a pothole, or been off-road.
