Loading

How to manually release electronic parking brake Honda HRV?

If you need to manually release the electronic parking brake on your Honda HR-V, there is a straightforward process you can follow. This guide will walk you through the steps to safely disengage the parking brake in case of an emergency or if the electronic system is not functioning properly.


Steps to Manually Release the Electronic Parking Brake



  1. Locate the parking brake release lever. This is typically found on the driver's side of the vehicle, near the floor.

  2. Pull the release lever up firmly and hold it in that position.

  3. While holding the release lever, press down on the brake pedal to release the parking brake.

  4. Once the parking brake is fully released, you can remove your foot from the brake pedal and the release lever.


It's important to note that manually releasing the electronic parking brake should only be done in emergency situations or if the electronic system is not functioning properly. Regularly using the manual release method can cause premature wear on the parking brake components.


Why You May Need to Manually Release the Parking Brake


There are a few common reasons why you may need to manually release the electronic parking brake on your Honda HR-V:



  • Electronic System Failure: If the electronic parking brake system experiences a malfunction, the manual release may be the only way to disengage the brake.

  • Battery Drain: If your vehicle's battery is drained, the electronic parking brake may not be able to be released electronically.

  • Emergency Situations: In the event of an emergency, such as a vehicle breakdown or accident, manually releasing the parking brake may be necessary to move the vehicle to a safe location.


Knowing how to properly and safely manually release the electronic parking brake on your Honda HR-V can be a valuable skill in these types of situations.

Can you manually release an electronic parking brake?


Using the correct socket that fits in the back of the caliper piston, turn the caliper piston adjustment bolt ½ to one full turn to release the brake caliper. Do this to both sides.



How do you manually release a stuck e-brake?


If it is safe to do so, you can try rocking the vehicle back and forth or manually getting under the vehicle to pull the cables. You can also try setting and releasing the brake multiple times in the hopes of knocking the brakes free. If all of these methods fail, a tow truck might be in your future.



How to disengage parking brake Honda HRV?


The electric parking brake with automatic brake hold is standard on every HR-V trim. Instead of the traditional hand lever or foot pedal for the parking brake, HR-V owners can simply use the electric parking brake switch to set or release the vehicle's parking brake.



How to release electronic parking brake with dead battery Honda CRV?


You cannot apply or release the parking brake if the 12-volt battery goes dead. If you pull up and hold the electric parking brake switch while driving, the brakes on all four wheels are applied by the VSA system until the vehicle ® comes to a stop.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.