How to put a Ford Expedition into 4 wheel drive?
To put a Ford Expedition into 4 wheel drive, you'll need to follow a few simple steps. The process is straightforward and can be done quickly, allowing you to engage the 4WD system when needed for off-road driving or challenging weather conditions.
Steps to Put a Ford Expedition into 4 Wheel Drive
- Bring the vehicle to a complete stop on a level surface.
- Shift the transmission into neutral.
- Locate the 4WD selector switch, usually found on the dashboard or center console.
- Move the 4WD selector switch from the 2WD (two-wheel drive) position to the 4WD position.
- Shift the transmission back into gear, and you're ready to drive in 4 wheel drive mode.
It's important to note that the Ford Expedition's 4WD system is designed for use on a variety of terrain, from paved roads to off-road conditions. However, it's crucial to engage the 4WD system only when necessary, as driving in 4WD on dry, paved roads can cause premature wear on the drivetrain components.
Reasons to Use 4 Wheel Drive in a Ford Expedition
- Improved Traction: 4WD provides better traction and control in slippery or uneven conditions, such as snow, ice, mud, or loose gravel.
- Enhanced Off-Road Capability: The 4WD system in the Ford Expedition allows for improved performance and maneuverability when driving off-road, such as on trails or in rugged terrain.
- Increased Stability: 4WD can help improve the vehicle's stability and handling, especially when towing a heavy load or navigating steep inclines.
Remember, it's essential to familiarize yourself with your Ford Expedition's 4WD system and its proper usage to ensure safe and effective operation in a variety of driving conditions.
How to turn on 4WD Ford Expedition?
To put a Ford Expedition in 4WD, use the 4WD control button or dial on the instrument panel or center console to select the desired mode, such as 4-Auto, 4-High, or 4-Low. You can shift to 4-Auto, 4-High, or 4-Low at normal driving speeds, but the vehicle must be stopped with the transmission in Neutral to shift into 4-Low.
This video explains the different drive modes and how to change them in a Ford Expedition: 58sDIY PintoYouTube · Sep 19, 2025
For 4-Auto, 4-High, or 4-Low
- Locate the 4WD control switch or dial: on the instrument panel or center console.
- Select your desired mode:
- 4-Auto: Automatically engages 4WD when needed for on-road conditions like snow or wet surfaces.
- 4-High: For slippery conditions or trails, like dirt roads.
- 4-Low: For low-speed situations requiring maximum torque, such as deep snow, mud, or sand.
For 4-Low only
- Stop the vehicle completely .
- Shift the transmission to Neutral (N) .
- Press the 4L button: on the control switch.
- Confirm the shift: The cluster will display a message, and the lights on the control switch will flash while the system engages.
- Once engaged, you can shift back into drive if needed, but remember that 4L is not intended for use on dry pavement.
Is the Ford Expedition AWD or 4WD?
| Ford Expedition | |
|---|---|
| Body style | 4-door SUV |
| Layout | Front-engine, rear-wheel-drive Front-engine, four-wheel-drive |
| Chassis | Body-on-frame |
| Related | Lincoln Navigator |
What is 4H mode on Ford Expedition?
The "4H" (Four-wheel drive high) drive mode on a Ford Expedition is for driving on loose or slippery surfaces like deep snow, sand, or mud, but it is not for use on dry pavement. In 4H, power is electronically locked and delivered to all four wheels, providing extra traction and grip in off-road or challenging winter conditions.
This video demonstrates how to use the drive modes on a Ford Expedition: 1mFord Middle EastYouTube · Dec 11, 2023
When to use 4H
- Off-road: Driving on loose surfaces like gravel, sand, or dirt trails.
- Winter conditions: Navigating deep snow, ice, or slippery roads.
When not to use 4H
- Dry pavement: Do not use 4H on dry, hard-surfaced roads, as this can cause excessive noise, increase tire wear, and damage the drivetrain.
How to use 4H
- Select the mode: Rotate the dial on the center console to cycle through the drive modes until "4H" is displayed on your instrument cluster.
- Switching to 4H: You can typically switch from 2H to 4H while driving, but it is best to do so at speeds below 60 mph and on a non-paved surface.
- Switching from 4H: To switch back to 2H or another mode, simply rotate the dial again. It is recommended to be stopped when shifting between 4H and 4L.
You can watch this video to learn how to select the correct 4x4 mode for your driving conditions: 58sJim Brickell - Ed Learn Ford LincolnYouTube · Jul 19, 2024
Is the Ford Expedition four-wheel drive?
Yes, the Ford Expedition is available with 4-wheel drive (4WD), but rear-wheel drive (RWD) is standard on most models. You can choose to purchase an Expedition with either 4WD or 2WD depending on the trim and your needs.
This video explains the different drive modes in the Ford Expedition: 57sFord Middle EastYouTube · Dec 11, 2023
- Standard drivetrain: Rear-wheel drive (4x2) comes standard on the base models.
- Optional drivetrain: Four-wheel drive (4x4) is an optional feature that can be added to many trims.
- Capability: The available 4WD system is designed to provide enhanced traction for challenging driving conditions, both on and off-road.
- System details: Some 4WD models come with Ford's Terrain Management System and a Touch-on-Demand 4-Auto mode.
