How to quick start a Chevy Equinox?

If you need to quickly start your Chevy Equinox, there are a few simple steps you can follow. The process involves checking the battery, ensuring the transmission is in the proper gear, and turning the ignition key. By following these steps, you can get your Equinox up and running in no time.

Checking the Battery

The first step in quickly starting your Chevy Equinox is to ensure the battery is in good condition. Make sure the battery terminals are clean and tight, and that the battery has a sufficient charge. If the battery is dead, you may need to jump-start the vehicle or replace the battery before proceeding.

Putting the Transmission in the Proper Gear

Next, check that the transmission is in the correct gear. For a quick start, the transmission should be in the "Park" position for automatic transmissions or the "Neutral" position for manual transmissions. This will allow the engine to start without the vehicle moving.p>

Turning the Ignition Key

Once the battery and transmission are checked, turn the ignition key to the "Start" position. Hold the key in this position until the engine starts, then release it. If the engine does not start after a few seconds, avoid cranking the engine continuously, as this can drain the battery. Instead, wait a moment and try again.p>

Additional Tips

• Make sure the fuel tank has enough gas before attempting to start the vehicle.


• Check for any warning lights or error messages on the dashboard, as these could indicate an issue that needs to be addressed before starting the engine.


• If the engine still does not start, there may be a more complex issue that requires the attention of a qualified mechanic.

By following these simple steps, you can quickly and safely start your Chevy Equinox and get on your way. Remember to always prioritize safety and consult your owner's manual for any specific instructions or recommendations from the manufacturer.

How to remote start a Chevy Equinox with a key fob?

Yes you can this is the key fob for the Equinox. The ones that are equipped with the remote. Start. Will have this circle times two that's where you lock the vehicle.

How do I start my Chevy with my key fob?

To start your Chevy with your key fob, first press the lock button on the fob to secure the vehicle, then press and hold the remote start button (the one with a circular arrow) for at least four seconds. The parking lights will flash to confirm the engine is starting, which will typically run for about 10 to 15 minutes before shutting off automatically. 
This video demonstrates how to remote start your Chevy using the key fob: 1mChevroletYouTube · Mar 18, 2022
Step-by-step instructions

1. Lock the vehicle: Press the lock button on your key fob to ensure the vehicle is locked. 
2. Press and hold the remote start button: Find the remote start button on your key fob (it looks like a circular arrow) and press and hold it for about four seconds. 
3. Check for confirmation: Your vehicle's parking lights will flash to let you know the engine is starting. 
4. Enter and drive: To drive, enter the vehicle, press the brake pedal, and then press the power/start button as you normally would. The engine will continue to run. 

Important things to know

• Time limit: The engine will run for a set time (e.g., 15-20 minutes) and then shut off automatically. You can restart it again if needed. 
• Safety precautions: The remote start will not work if the hood is open, the key fob is inside the car, or if hazard lights are on. 
• Alternative method: If you have a suitable plan, you can also use the MyChevrolet mobile app to remote start your vehicle. 

What is the lock button 3 times remote start?

3X Lock Remote Start
For many vehicles, just press lock 3 times on your existing factory key fob to start your vehicle, no extra remote needed. If your vehicle is not compatible with 3x Lock or you require extra long-range, you can purchase a long-range remote at highly discounted rates.

Do Chevy Equinox have remote start?

Yes, the Chevy Equinox has remote start, but it's typically available on higher trim levels or as an add-on feature. You can start it using the key fob or the MyChevrolet mobile app. 
You can watch this video to learn how to remote start a 2026 Chevy Equinox using the key fob: 26sWalser Polar ChevroletYouTube · Oct 19, 2025
Using the key fob

1. Press the "lock" button on your key fob to lock all doors. 
2. Press the "remote start" button, which has a circular arrow icon, twice (or press and hold it). 
3. The turn signals will flash to confirm the vehicle has started. 
4. To turn off the engine, press the remote start button again. 

Using the MyChevrolet app 

1. Download and open the MyChevrolet app and log in.
2. Select the "Key Fob" or "Controls" option.
3. Tap the "Engine Start" button.
4. Enter your PIN if prompted. 

This video demonstrates how to remote start a Chevy Equinox using the key fob: 53sPhillipsChevyYouTube · Jun 26, 2025