How to remote start a 2018 Subaru Legacy?
Remote starting your 2018 Subaru Legacy is a convenient feature that allows you to warm up your car or cool it down before you get in. Here's a step-by-step guide on how to remote start your Subaru Legacy.
Prerequisites
- Your Subaru Legacy must be equipped with a remote start system. This feature was optional on some 2018 Subaru Legacy models.
- You'll need the factory-issued remote control that came with your vehicle.
- Make sure your Subaru Legacy is in park and the parking brake is engaged.
With these prerequisites in place, you're ready to remote start your 2018 Subaru Legacy.
Steps to Remote Start Your Subaru Legacy
- Locate the remote start button on your factory-issued remote control. It's typically a separate button from the lock and unlock buttons.
- Press and hold the remote start button for 2-3 seconds. You should see the parking lights on your Subaru Legacy flash to indicate the remote start has been activated.
- Your Subaru Legacy's engine will now start and run for a pre-set duration, typically 5-15 minutes, to allow the cabin to reach your desired temperature.
- To cancel the remote start, simply press the remote start button again or unlock the doors with your key fob.
That's all there is to it! Remote starting your 2018 Subaru Legacy is a simple process that can make your commute more comfortable, especially on cold winter mornings.
How do I remote start MySubaru Legacy?
To remote start a Subaru Legacy, press the lock button on your key fob twice, then press and hold the lock button again to start the engine. Alternatively, use the MySubaru app on your smartphone, which is a subscription service that works for most 2020 and newer models with a keyless entry fob and push-button start.
Using your key fob
- Ensure the doors are locked. You can do this by pressing the lock button once.
- Press the lock button: on your key fob twice within a two-second period.
- Press and hold the lock button: for about 3 seconds.
- The hazard lights will flash and the horn will honk to confirm the vehicle has started.
- To turn the engine off, press and hold the lock button again.
This video demonstrates how to use the genuine Subaru remote start accessory with a key fob: 48sTyson The Subaru Specialist YouTube · Nov 20, 2024
Using the MySubaru app
- Download and set up the app: Download the MySubaru app, create an account, and link your vehicle using its VIN.
- Open the app and select Remote Start: Go to the "Remote Services" section and tap the "Remote Start" button.
- Adjust climate preferences: Before starting, you can set your desired temperature and other preferences, such as heated seats, within the app.
- Start the engine: Press the "Remote Start" button in the app.
- To stop the engine: Use the "Stop" button within the app.
You can watch this video to learn how to use the MySubaru app for remote start: 1mAlex PrestigiacomoYouTube · Feb 5, 2023
Important notes
- Remote start systems may have different features depending on the model year and installed accessories.
- For the MySubaru app, a subscription is typically required, and the service is generally available on models 2020 and newer with a keyless entry fob and push-button start.
- For both methods, the car will remain locked and will not be drivable until you press the brake pedal and the start button with your key fob inside the vehicle.
How do I know if my 2018 Subaru has remote start?
Remote Engine Start is available on all Subaru models equipped with keyless access with push button start. Remote Engine Start with Climate Control is available on keyless access vehicles with push button start and automatic climate control. On many trims, remote start capability comes standard.
Can you remote start a 2018 Subaru Legacy?
Except for the Base, all Subaru Crosstrek, Forester, Outback, Impreza, and Legacy trims come standard with the STARLINK remote engine start system. Subaru Ascent, Solterra, and WRX models have the STARLINK Remote Engine Start system in every trim.
Can I remote start MySubaru with my key fob?
Yes, you can remote start many Subaru models with a key fob, typically by pressing the lock button twice and then holding it until the engine starts. This feature is generally available on models with an automatic transmission and either a factory-installed system or a genuine accessory remote start.
To remote start your Subaru
- Press the lock button: once briefly.
- Press the lock button again: within a few seconds.
- Press and hold the lock button: a third time. The engine will start once the lights flash and/or the horn beeps.
This video demonstrates how to remote start a Subaru with a key fob: 55sTyson The Subaru Specialist YouTube · Dec 18, 2023
To turn the engine off
- Press and hold the lock button to shut the engine off.
Important to know
- Vehicle requirements: Your Subaru needs an automatic transmission and a keyless entry/push-button start system for this to work. Base models with a standard key ignition will not have this feature.
- Door locks: All doors, the hood, and the trunk must be fully closed for the system to work.
- Run time: The engine will typically run for about 13 to 15 minutes before it automatically shuts off.
- Alternative method: You can also use the MySubaru app to remote start your vehicle if your model is equipped with it.
