Home FAQ

How to use cruise control on a Chevy Volt?

The Chevy Volt is a plug-in hybrid electric vehicle that offers a convenient cruise control feature to help drivers maintain a steady speed on the highway. This guide will walk you through the steps to activate and use the cruise control system on your Chevy Volt.

Activating Cruise Control

To activate the cruise control on your Chevy Volt, follow these steps:

Ensure your Volt is in Drive (D) mode.

Press the Cruise Control button on the steering wheel. This will turn on the cruise control system.

Accelerate to your desired speed, then press the Set button on the steering wheel. This will set the current speed as your cruise control speed.

Once the cruise control is set, your Volt will maintain the selected speed without you needing to press the accelerator pedal.

Adjusting Cruise Control Speed

You can adjust the cruise control speed in the following ways:

To increase speed, press the Resume/Accel button on the steering wheel.

To decrease speed, press the Coast/Decel button on the steering wheel.

To temporarily disengage cruise control without turning it off, tap the brake pedal. To resume the set speed, press the Resume/Accel button.

Remember, it's important to always keep your hands on the steering wheel and be prepared to take over control of the vehicle when using cruise control.

Turning Off Cruise Control

To turn off the cruise control system, press the Cruise Control button on the steering wheel again. This will disengage the cruise control and return the vehicle to normal driving mode.

By following these steps, you can easily use the cruise control feature on your Chevy Volt to help maintain a consistent speed and reduce driver fatigue on long highway drives.

What year to avoid Chevy Volt?

The Chevy Volt years to avoid are generally the 2012, 2013, and 2017 models, primarily due to issues with the heater coolant heater, the auxiliary coolant pump, and the battery energy control module (BECM). The 2016 model also had more frequent issues, and some 2018 models need to be checked for the BECM failure if manufactured before March 2018.
Years to avoid

2012 and 2013: These model years are prone to failures with the heater coolant heater and the auxiliary coolant pump, which can be expensive to repair or replace.
2017: This year is notorious for BECM failures. While a recall and extended warranty are in place, the parts can be difficult to get, causing significant downtime.
2016: Although the first year of the second generation, the 2016 model had a higher frequency of issues than other second-gen years.
2018: Be cautious with 2018 models manufactured before March 2018, as they may have the same BECM issue that plagued the 2017 model year.

What to look for in other years

2014 and 2015: These are generally reliable years, but the 2015 model was the last year of the first generation and had a smaller battery than the second-gen models that started production later in the year.
2018: The 2018 model year is considered by some to be a good balance of value and reliability, especially if you can find one made after March 2018 to avoid the BECM issue.
2019: The 2019 model year offers some upgrades but can be expensive due to dealer pricing.

How to activate cruise control on Chevy?

To turn the feature on, press the cruise control On/Off button on the steering wheel. When the system is turned on, you'll see a white Adaptive Cruise Control icon in your cluster display or on your Head-Up Display, if your vehicle has that feature.

Why is my cruise control not working on my Chevy Volt?

The most common reasons a Chevrolet Volt cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems. Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.

How do I turn on cruise control?

To turn on cruise control, first accelerate to your desired speed, then press the "On/Off" button to activate the system, and finally press "Set" to lock in the speed. You should see an indicator light on your dashboard confirming the system is active.

This video explains how to use cruise control in a car: 57sAdvance Driving SchoolYouTube · May 8, 2019
Step 1: Turn on the system

Locate the "On/Off" button, which is usually on the steering wheel or a stalk behind it.
Press the "On/Off" button to enable the system. A "Cruise Main" message or an indicator light will appear on the dashboard, but the system is not yet active at a specific speed.

Step 2: Set your speed

Drive at the speed you want to maintain.
Press the "Set" button. On some cars, this is a physical button, while on others, it's a stalk you push down.
The system is now active, and you can take your foot off the accelerator.

Step 3: Adjust and manage your speed

Increase speed: Press and hold the "Resume" or "+" button to accelerate, or simply press the gas pedal until you reach the new speed and press "Set" again.
Decrease speed: Press and hold the "Cancel" or "-" button to slow down.
Cancel cruise control: Press the brake pedal or the dedicated "Cancel" button to temporarily disengage cruise control.
Resume speed: To return to the previously set speed, press the "Resume" or "RES" button.

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.