How to use cruise control on a Subaru Outback 2014?
Cruise control is a convenient feature in the 2014 Subaru Outback that allows you to maintain a consistent speed without constantly pressing the accelerator pedal. This can be especially useful on long highway drives. Here's a step-by-step guide on how to use the cruise control system in your Subaru Outback 2014.
Activating Cruise Control
To activate the cruise control system in your Subaru Outback 2014, follow these steps:
- Ensure your vehicle is traveling at least 25 mph (40 km/h).
- Press the "Cruise" button located on the steering wheel. This will turn on the cruise control system and the cruise control indicator light on the dashboard will illuminate.>
- Accelerate to the desired speed, then press the "Set" button on the steering wheel. This will set the current speed as the cruise control speed.li>
Once the cruise control is set, your Subaru Outback 2014 will maintain the selected speed without you having to press the accelerator pedal.
Adjusting Cruise Control Speed
You can adjust the cruise control speed in your Subaru Outback 2014 using the following methods:
- To increase the speed, press the "Resume/Accel" button on the steering wheel.
- To decrease the speed, press the "Coast/Decel" button on the steering wheel.
- You can also tap the accelerator pedal to temporarily increase the speed, and the cruise control will resume the previously set speed once you take your foot off the pedal.
These adjustments allow you to fine-tune the cruise control speed to your desired level.
Disabling Cruise Control
To disengage the cruise control system in your Subaru Outback 2014, you can use one of the following methods:
- Press the "Cancel" button on the steering wheel. This will deactivate the cruise control without erasing the set speed.
- Tap the brake pedal. This will also deactivate the cruise control without erasing the set speed.
- Press the "Cruise" button on the steering wheel again. This will turn off the cruise control system completely and erase the set speed.
By following these steps, you can easily use the cruise control feature in your Subaru Outback 2014 to make your driving experience more comfortable and efficient.
Should I drive in S or I mode on my Subaru?
The main difference is that S (Sport) mode offers a more responsive throttle and engine response for quicker acceleration, while I (Intelligent) mode prioritizes fuel efficiency by softening the throttle response, making it ideal for daily commutes and highway cruising. Essentially, S mode makes the car feel more "punchy" and Sport Sharp (S#) is the most aggressive option for maximum performance, while I mode is for a smooth, economical drive.
This video explains the different drive modes in a Subaru Crosstrek: 1mSubaruCanadaYouTube · Nov 27, 2020
I (Intelligent) Mode
- Focus: Fuel efficiency and smooth acceleration.
- Engine & throttle: The throttle opens more gradually, and the system uses a different engine map, which helps save fuel.
- Best for: City driving, daily commutes, or long highway trips where you want to prioritize fuel economy.
S (Sport) Mode
- Focus: A balance of performance and efficiency.
- Engine & throttle: Offers quicker throttle response for a more direct and responsive feel.
- Best for: All-around driving, including highways, suburban streets, and when you need extra power for passing or merging.
S# (Sport Sharp) Mode (available on some models)
- Focus: Maximum performance and a very engaging driving experience.
- Engine & throttle: Provides the sharpest throttle response and the most direct engine mapping.
- Best for: Spirited driving, mountain roads, or performance situations like merging onto a busy highway.
How do I activate my cruise control?
To turn on cruise control, first accelerate to your desired speed, then press the "On/Off" button to activate the system, and finally press "Set" to lock in the speed. You should see an indicator light on your dashboard confirming the system is active.
This video explains how to use cruise control in a car: 57sAdvance Driving SchoolYouTube · May 8, 2019
Step 1: Turn on the system
- Locate the "On/Off" button, which is usually on the steering wheel or a stalk behind it.
- Press the "On/Off" button to enable the system. A "Cruise Main" message or an indicator light will appear on the dashboard, but the system is not yet active at a specific speed.
Step 2: Set your speed
- Drive at the speed you want to maintain.
- Press the "Set" button. On some cars, this is a physical button, while on others, it's a stalk you push down.
- The system is now active, and you can take your foot off the accelerator.
Step 3: Adjust and manage your speed
- Increase speed: Press and hold the "Resume" or "+" button to accelerate, or simply press the gas pedal until you reach the new speed and press "Set" again.
- Decrease speed: Press and hold the "Cancel" or "-" button to slow down.
- Cancel cruise control: Press the brake pedal or the dedicated "Cancel" button to temporarily disengage cruise control.
- Resume speed: To return to the previously set speed, press the "Resume" or "RES" button.
How to use cruise control on a 2014 Subaru Outback?
Setting Up Cruise Control in Your Subaru Car
- Press the cruise control main button, which can be found near your steering wheel.
- Depress your accelerator pedal until your desired speed is reached.
- Ensure the “RES/SET” switch is at the “SET” side before releasing your accelerator pedal.
- You are all done!
How to turn on cruise control on a Subaru Outback?
Control. Say you don't want your distance set from the car in front of you you can just hold this down. And now you're in regular cruise.
