How wide are Toyota axles?
There isn't one universal width for Toyota axles. The term typically refers to the track width—the distance between the centers of the wheel hubs on the same axle—and it varies by model and year. Across the Toyota lineup, you’ll find a broad range, roughly from about 60 inches to 70 inches, with smaller cars at the low end and larger SUVs and pickups at the high end.
What axle width means in Toyota specs
In official specifications, axle width is usually presented as front track width and rear track width. These measurements indicate how far apart the wheel hubs sit on the same axle, and they can differ between the front and rear axles on a given vehicle. Exact figures depend on the model, year, trim level, wheel size, and tire package.
Typical ranges by vehicle class
To give a general sense of how wide Toyota axles tend to be across common classes, here is a broad guide. Note that exact numbers vary by year, trim, and aftermarket wheel/tire choices.
- Small cars and compact sedans (e.g., Corolla, smaller hatchbacks): roughly 60–62 inches (about 1,520–1,575 mm).
- Mid-size sedans (e.g., Camry): typically around 60–63 inches (1,525–1,600 mm).
- Compact SUVs (e.g., RAV4, C-HR): commonly in the mid- to upper-60s, about 63–66 inches (1,600–1,680 mm).
- Mid-size SUVs (e.g., Highlander, 4Runner): generally in the mid-60s to high-60s, around 64–67 inches (1,625–1,700 mm).
- Pickup trucks (e.g., Tacoma, Tundra): larger track widths, roughly 66–70 inches (1,670–1,780 mm) depending on wheels and trim.
These figures are approximate and can shift with model-year changes, new platforms, and different wheel sizes. For precise planning—such as trailer hitch clearance, garage width, or aftermarket tire fitment—check the exact spec sheet for your specific vehicle.
Where to find the exact numbers
For precise axle widths, refer to official sources or trusted databases. The exact front and rear track widths are published in model-year specifications and brochures, and they can vary even within the same model across generations.
Official Toyota sources
Visit Toyota's official website or your local dealer's promotional materials, then navigate to your specific model and year. Look for sections labeled “Specifications,” “Technical Details,” or “Chassis,” where front and rear track widths are listed in inches or millimeters. If you don’t see them, request a formal spec sheet from a dealership or Toyota's technical documentation library.
Other reliable sources
Automotive sites and consumer guides (for example, Edmunds, MotorTrend, or model-specific brochures) often reproduce track width data. Always confirm you’re looking at the exact year and trim, since wheel/tire packages can cause minor variations.
Measuring your own vehicle
A DIY approach is straightforward: measure the distance between the centers of the front wheels for the front track, and do the same for the rear wheels for the rear track. Inflate tires to normal pressure, use a straightedge or laser measure, and record both values. This method is useful for quick checks or unusual tire setups.
Conclusion
There is no single width for Toyota axles. Track widths are vehicle- and year-specific, and even trim and tire choices can shift measurements slightly. For practical purposes—parking, garage clearance, or trailer compatibility—consult the exact figure from the official spec sheet for your model and year, or share your specific model/year and I’ll help pull the precise numbers.
Summary
In short, Toyota axle widths vary across models and generations. If you need an exact figure, rely on the official spec sheet for your vehicle’s exact year and trim, or provide the model/year here and I can look up the precise track widths for you.
How wide is a Toyota axle?
Toyota Axle Widths:
T100 front IFS~ 65", rear axle~ 66.75"
What is the width of the rear axle on a 2017 Toyota Tacoma?
Toyota Axle Widths
| Vehicle models | Front or Rear | Width, WMS to WMS |
|---|---|---|
| Toyota T100 | Front axle | 65" |
| Rear axle | 66.75" | |
| Toyota Tacoma and 4Runner | Front axle | 60.75" |
| Rear axle | 60.75" |
How wide is a 7.5 rear end?
The 1983 to 1992 Ranger 7.5 is about 56.50 Inches wide (this is about only 1 inch wider than the stock 7 1/4 inch) the 1993 to 2009 Rangers are about 58.50 inches wide. These 7.5 were used in the V6 Mustang too but some what wider in the fox Chassis Cars.
What is the axle width?
Axle Width A measurement across your axle from wheel mounting surface to wheel mounting surface. Tire Width The width of your tire, usually stamped on the tire.
