How wide is a 92 Dodge Dakota?
The body width of a 1992 Dodge Dakota is about 66.9 inches, and the overall width with standard mirrors is roughly 78 inches. These figures come from era-specific spec sheets and are generally representative for regular and extended cabs, though mirrors and aftermarket accessories can adjust the total width.
Understanding the width figures
Width can be reported in two common ways: the body width (excluding mirrors) and the overall width (including mirrors). For the Dakota, the former describes the vehicle’s true panel-to-panel distance, while the latter accounts for the outer edges added by exterior mirrors. Distinctions between cab configurations (regular vs. extended/club cab) do not typically shift the body width by much, but they may influence how the overall width is measured with mirrors in place.
Key width figures for the 1992 Dakota
To help readers grasp the practical dimensions, the following figures summarize the main width measurements you’re likely to encounter when researching or parking a ’92 Dakota. The numbers reflect common factory specifications from the era and may vary slightly by trim, mirrors, or aftermarket accessories.
- Body width (excluding mirrors): approximately 66.7–67.0 inches (about 1,695–1,700 mm)
- Overall width (including mirrors): approximately 77–78 inches (about 1,955–1,981 mm)
These ranges cover the typical configuration for a 1992 Dakota, including regular cab and club cab variants, as well as 2WD and 4WD setups. If your vehicle has aftermarket mirrors or bumper additions, the total width can be wider than these figures.
Why width matters for enthusiasts and owners
Width informs how much space you’ll need in a garage, driveway, or parking lot. It also affects turning radius considerations and trailer hitch alignment when pairing the Dakota with light-duty trailers. For collectors restoring a 1992 Dakota, knowing the precise body width helps with panel sourcing and compatibility with original dimensions.
Practical notes for buyers and restorers
When evaluating a 1992 Dakota for purchase or restoration, verify the exact measurements on the specific vehicle, especially if aftermarket mirrors or protective guards are installed. Manufacturers’ original spec sheets provide baseline numbers, but real-world measurements on the vehicle in question are the most reliable reference.
Summary
In summary, a 1992 Dodge Dakota typically measures about 66.9 inches wide across the body, with an overall width around 77–78 inches when mirrors are included. These figures are representative of the era and model, with slight variations possible due to cab configuration or aftermarket additions. For precise planning—whether it’s parking, garage space, or restoration work—measure the exact vehicle at its widest points and account for any non-original accessories.
What year to stay away from Dodge Dakota?
To ensure performance and comfort, it's best to avoid the 1999, 2000, 2002, 2005, and 2006 Dodge Dakotas. These pickup trucks are plagued by broken suspensions, engine issues, defective brakes, steering failure, transmission problems, and some cosmetic issues (the paint job).
How wide is a 1991 Dodge Dakota?
1991 Dodge Dakota has an overall width of 69.40 in. The turning diameter of the car is 38.50 in. The length of the trim is 184.20 in. The height comes to 67.10 in.
How wide is a 1992 Dodge Dakota?
69.4 inches
What is the width of a Dodge Dakota?
Third generation (2005–2011)
| Third generation | |
|---|---|
| Wheelbase | 131.3 in (3,335 mm) |
| Length | 218.8 in (5,558 mm) |
| Width | 76.4 in (1,941 mm) |
| Height | Club Cab: 68.6 in (1,742 mm) Quad Cab: 68.7 in (1,745 mm) |
