Loading

How wide is a Toyota rear axle?

There isn’t a single fixed measurement for “rear axle width” across Toyota’s lineup. Width depends on model, generation, and body style. In general, rear track widths for many Toyota vehicles fall roughly between 60 and 66 inches (about 1.52–1.68 meters), with exact figures published in model‑specific specifications.


What rear axle width is and how it’s measured


Definitions and measurement differences


The term “rear axle width” is often used interchangeably with “rear track width.” Technically, track width is the distance between the centers of the two rear wheel hubs. Some manuals also list “axle width” as the distance between the outer faces of the axle housings or between the wheel mounting surfaces, depending on the standard used by the automaker. Always check the exact specification in your model’s data sheet to avoid confusion.


Typical ranges by Toyota model family


To give you a sense of where a typical Toyota falls, here are ballpark ranges by vehicle category. These figures are approximate and vary by generation, trim, and wheel/tire configurations.



  • Compact cars (Corolla, Prius, Yaris): about 58–60 inches (1,473–1,524 mm) track width.

  • Midsize sedans (Camry, Avalon): about 60–62 inches (1,524–1,575 mm).

  • SUVs (RAV4, Highlander, 4Runner): about 61–66 inches (1,549–1,676 mm).

  • Trucks (Tacoma, Tundra): about 62–66 inches (1,575–1,676 mm).


Note that some generations of a model may be narrower or wider depending on platform changes, independent of trim level. Always verify against the exact year/model you’re evaluating.


How to find the exact rear axle width for your Toyota


Use official sources and, if needed, a direct measurement, to confirm the precise figure for your car. Here are reliable ways to obtain the exact number.



  1. Check the official specifications sheet for your year and model. Look for “Wheel track” or “Rear track width” in inches (and millimeters).

  2. Open the owner’s manual or the service/workshop manual and locate the “Technical data” or “Chassis” section where track width is listed.

  3. Consult Toyota’s official online brochure or build‑sheet citations for your VIN, or contact a Toyota dealer’s parts or service department to fetch the exact spec.

  4. If you must measure it yourself, measure the distance from the centerline of the left rear wheel hub to the centerline of the right rear wheel hub, with the vehicle on a level surface and the wheels aligned straight. Use a straightedge or long tape and verify with at least two independent measurements.


This approach ensures you get the precise width for your exact vehicle configuration, which matters for wheel fitment, alignment, and aftermarket part compatibility.


Why rear axle width matters in practice


Width affects wheel fit, tire coverage, and stability. A wider rear track generally improves cornering stability but can limit the use of wider tires if clearance is tight, while a narrower track can affect stance and handling. If you’re selecting aftermarket wheels or planning a lift or body modifications, knowing the exact rear axle width helps ensure components fit without rubbing or alignment issues.


Summary


In short, there isn’t a single “Toyota rear axle width.” The dimension varies by model and year, but most modern Toyotas fall into a range roughly between 60 and 66 inches for rear track width. For precision, consult the official specifications for your exact year/model or measure the wheel hub centers directly on the vehicle. Knowing the exact figure supports correct wheel fitment, safe handling, and proper clearance in any modification project.

What size is the rear differential on a Toyota Tundra?


10.5" Rear Differential Axle Assembly for Toyota Tundra with 4:30 Gear Ratio.



What is the width of the rear axle on a 2017 Toyota Tacoma?


Toyota Axle Widths

Vehicle modelsFront or RearWidth, WMS to WMS
Toyota T100Front axle65"
Rear axle66.75"
Toyota Tacoma and 4RunnerFront axle60.75"
Rear axle60.75"



How wide is a 7.5 rear end?


The 1983 to 1992 Ranger 7.5 is about 56.50 Inches wide (this is about only 1 inch wider than the stock 7 1/4 inch) the 1993 to 2009 Rangers are about 58.50 inches wide. These 7.5 were used in the V6 Mustang too but some what wider in the fox Chassis Cars.



What is the width of the rear axle on a 1995 Toyota Tacoma?


Toyota Axle Widths:
'86-95 front IFS~ 59", rear axle- 58.5" Tacoma 4x4, rear axle- 60" T100 front IFS~ 65", rear axle~ 66.75"


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.