How wide is the rear end of a 60 Falcon?
The 1960 Ford Falcon, a compact car produced by the Ford Motor Company, had a rear end width that measured approximately 60 inches or 5 feet. This dimension was a key factor in the Falcon's overall design and performance characteristics.
Understanding the Falcon's Rear End Dimensions
The rear end of a vehicle, also known as the rear axle or rear suspension, plays a crucial role in the car's handling, stability, and overall driving dynamics. For the 1960 Ford Falcon, the rear end width was an important design consideration that contributed to the vehicle's compact and maneuverable nature.
The 60-inch rear end width of the Falcon was relatively narrow compared to larger, full-size vehicles of the era. This compact rear end design helped to enhance the Falcon's agility and responsiveness on the road, making it a popular choice for urban and suburban driving.
Factors Influencing the Falcon's Rear End Design
Several factors influenced the design of the 1960 Ford Falcon's rear end, including:
- Compact Chassis: The Falcon was built on a unibody chassis that was smaller and lighter than the body-on-frame designs of larger Ford models. This compact chassis allowed for a narrower rear end without compromising stability or handling.
- Fuel Efficiency: The Falcon's smaller size and lighter weight, including its narrow rear end, contributed to improved fuel efficiency, which was a key selling point for the compact car market at the time.
- Maneuverability: The Falcon's narrow rear end, combined with its short wheelbase and overall compact dimensions, made the vehicle highly maneuverable in tight spaces, such as city streets and parking lots.
These design considerations helped to make the 1960 Ford Falcon a popular and successful compact car, appealing to a wide range of consumers who valued its combination of practicality, efficiency, and driving dynamics.
Are all Dana 60 rear axles the same?
Dana 60 rear axle
Manufactured in both full float and semi float variations. The semi float axles have GAWR up to 5,500 lbs and the full float axles were rated up to 6,500 lbs. Full floating variants are common while Semi-floating axles exist, but are less common.
How wide is the rear axle on a 1965 Falcon?
The 1964 & 65 Falcon and Comets V8's had a 58 inch wide 8 inch axle. The match from that is the 1977 to 1981 Granada / Monarch had both the 8 and 9 inch axles or the Lincoln Versailles 9 inch rear end the bonus is that they also have Disk Brakes.
What is the width of the rear axle on a 1963 Ford Falcon?
The standard width is 56.5″ Axle Flange to Axle Flange but custom widths are available for mini-tubbed cars.
What is a 1960 Ford Falcon worth today?
Typically, you can expect to pay around $8,240 for a 1960 Ford Falcon in good condition with average spec. What is the highest selling price of a 1960 Ford Falcon? The highest selling price of a 1960 Ford Falcon at auction over the last three years was $4,450.
