Is there a recall on Lexus IS250 fuel pressure sensor?

In short, there is no active recall specifically targeting the fuel pressure sensor on the Lexus IS250 in the United States as of today. If you want absolute certainty about your vehicle, check official recall records for your VIN.

Current recall landscape and what it means for IS250 owners

The Lexus IS250, produced across model years roughly 2006 through 2012 in the U.S., uses a 2.5-liter V6 engine. While there have been recalls affecting fuel systems on related Toyota/Lexus models in the same generation, a dedicated, ongoing IS250 fuel pressure sensor recall has not appeared in the national database. Verification by VIN is essential because recalls can vary by vehicle configuration and market.

Note on accuracy and timelines

Recall information is dynamic. A campaign could be announced or closed after this article is published. Always confirm with the latest official notices using your VIN.

How to verify recall status for your Lexus IS250

To determine whether a recall affects your specific vehicle, use these official sources and steps.

1. Search the NHTSA recalls database by entering your VIN (Vehicle Identification Number) or by model/year to view active and completed campaigns. NHTSA Recalls.


2. Log in to the Lexus Owners portal and check for any active service campaigns listed for your VIN. Lexus Owners.


3. Call or visit a local Lexus dealer's service department with your VIN; they can confirm eligibility and schedule repairs if needed.


4. If you’re unsure, contact Lexus Customer Service with your VIN and ask for recall status and service eligibility.

Keeping your VIN handy ensures you receive precise information. If a recall is found, the repair is usually performed at no charge.

What to do if you notice symptoms that could involve the fuel system

In addition to recalls, fuel-system issues can occur outside of recall campaigns. If you experience engine hesitation, stalling, rough idle, or a check engine light that mentions fuel or sensors, have the vehicle inspected promptly.

• Engine misfires or rough idle


• Stalling or reduced power while driving


• Fuel odor or unusual fuel-pump noises


• Check Engine Light or fault codes related to fuel pressure


• Difficulty starting or inconsistent performance

DO NOT drive the vehicle if it stalls consistently; have it towed or serviced, especially if warning lights are on. Fuel-system work should be performed by a qualified technician.

Summary

Current evidence does not show a live, nationwide recall specifically for the Lexus IS250 fuel pressure sensor. Recall campaigns can vary by VIN and country, and related fuel-system recalls have affected some Lexus/Toyota models in the same generation. The most reliable approach is to verify with official sources using your VIN and to consult a Lexus dealer for confirmation and next steps. Staying informed helps protect against potential safety and reliability issues.

What is the recall on Lexus fuel pressure sensors?

During vehicle operation, fuel could leak past the gasket. In the presence of an ignition source, this could increase the risk of a vehicle fire. What will Lexus do? Any authorized Lexus dealer will repair the fuel pressure sensor sealing surface and replace the gasket at No Charge to you.
PDF

How much to fix psi sensor on lexus IS250?

On average, the cost for a Lexus IS250 Tire Pressure Sensor Replacement is $99 with $4 for parts and $95 for labor.

What happens when the fuel pressure sensor goes bad?

When a fuel pressure sensor goes bad, it can cause a variety of symptoms, including the Check Engine light illuminating, engine performance issues like hard starting, stalling, and poor acceleration, reduced fuel efficiency, and rough idling. This happens because the sensor provides incorrect or no data to the engine control module (ECM), causing it to incorrectly manage the air-fuel mixture and timing. 
Performance and starting issues

• Hard starting or no-start condition: The sensor may give a false low-pressure reading, causing the engine to crank multiple times before starting or not start at all. 
• Stalling: The engine may stall unexpectedly, especially when idling or accelerating, due to improper fuel delivery. 
• Poor performance: You may experience a loss of power, poor acceleration, and misfires. 
• Rough idle: The engine may run erratically or vibrate while idling. 

Fuel economy and emissions problems

• Reduced fuel efficiency: An incorrect air-fuel ratio can lead to the engine using more fuel, resulting in poor gas mileage. 
• Increased emissions: Problems with the air-fuel ratio can lead to increased emissions, and sometimes black smoke from the tailpipe. 
• Fuel smell: A bad sensor can also be linked to fuel leaks from the evaporative emissions system, which can cause a noticeable fuel odor. 

Other signs

• Check Engine light: The ECM will detect the sensor's faulty input and trigger the Check Engine light. 

What to do
If you experience these symptoms, it is best to have a qualified technician diagnose the vehicle to confirm the sensor is the issue and replace it to avoid potential safety issues and further engine damage.

What is the common issue with the Lexus IS 250?

Common problems with the Lexus IS250 include carbon buildup in the direct injection engine, which can lead to misfires and rough idling, and issues with the plastic dashboard material fading or becoming sticky. Other reported problems include various check engine light codes, a clicking noise from the rear suspension, and potential moisture damage to the amplifier or other electrical components due to clogged AC drain tubes.
 
This video discusses common problems with the Lexus IS250 and IS350, including engine issues and plastic degradation: 50sLife with SondurenYouTube · Apr 9, 2023
Engine and drivetrain 

• Carbon buildup: This is a frequent issue, especially on second-generation models, due to the direct injection system and frequent idling. It can cause misfires, check engine lights, and rough idling. 
• Check engine light: Specific codes like P0751, P2714, P0894, or misfire codes (P0300-P0306) are reported, often related to the carbon buildup issue or other engine problems. 
• Transmission problems: Some drivers report transmission issues like slipping, which can be caused by a lack of fluid maintenance. 

Interior and electrical

• Sticky/aging dashboard: The plastic material on the dashboard can become sticky or fade over time, sometimes unresolved by recalls. 
• Moisture damage: Clogged AC drain tubes can lead to water leaking onto the carpet, and moisture can also get into the amplifier, causing it to malfunction. 
• Old infotainment system: The original infotainment system is often outdated, with common complaints about glitches, such as the radio randomly shutting off. 
• GPS and radio issues: Some owners have reported issues with the navigation system, sometimes fixable by a software or map disc update. 

Other issues

• Rear suspension noise: A clicking noise from the rear suspension has been reported by multiple owners. 
• Safety issues: Some specific model years have had safety recalls and investigations, including for airbag and steering components. 

You can watch this video for a detailed discussion of potential issues when buying a used Lexus IS250: 55sMiguel's GarageYouTube · Jan 19, 2018