What axles are in a 2000 Ford Excursion?
The 2000 Ford Excursion, a large SUV, was equipped with a variety of axle configurations depending on the specific model and options. The most common axle setups found in the 2000 Excursion included a front independent suspension and a rear solid axle.
Front Axle
The 2000 Ford Excursion featured a front independent suspension system, which means each front wheel was connected to the chassis independently. This design provided a smoother ride and better handling compared to a solid front axle. The front suspension typically consisted of coil springs, shock absorbers, and control arms to allow each wheel to move up and down independently.p>
Rear Axle
In the rear, the 2000 Excursion was equipped with a solid axle design. A solid rear axle connects both rear wheels together, allowing them to move in unison. This type of rear suspension is commonly found on larger SUVs and trucks, as it provides greater load-carrying capacity and towing capability.p>
Axle Configurations
The specific axle configurations available for the 2000 Ford Excursion depended on the model and options chosen by the buyer. Some key axle-related options included:
- Rear axle ratio choices, such as 3.73:1 or 4.10:1, to optimize towing, hauling, or fuel efficiency
- Four-wheel drive (4WD) systems, which added a transfer case and front axle to provide power to all four wheels
- Heavy-duty axle upgrades for increased towing and payload capacity
The 2000 Ford Excursion was designed to be a capable and versatile large SUV, with axle configurations that could be tailored to meet the needs of a wide range of buyers and usage scenarios.
What axles do Ford excursions have?
The Excursion had a distinct frame which differed from the front sway bar mounts rearward, making the model taller and wider than its pickup truck counterpart. The rear axle for all Excursions was a Sterling 10.5 axle. The four-wheel-drive models had an NV273 transfer case and Dana 50 front axle.
What trucks have Dana 44 axles?
- 1967–1973 Jeepster Commando and Commando.
- 1974–1991 Wagoneer (Passenger side 1974–1979, Driver side 1980–1991)
- 1974–1983 SJ.
- Late 1986 CJ-7.
- 2003–2006 TJ Wrangler Rubicon (Front and rear)
- 2007-2018 JK Wrangler Rubicon (Front and rear)
- 2018-2019 JL Wrangler Rubicon (Front and rear)
- 2020 JT Gladiator (Front and rear)
What Ford trucks have Dana 60 axles?
Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4x4 trucks. Each axle is built with a Bill of Material (BOM) Tag affixed to the differential cover by two cover bolts.
What years did Ford use Dana 60 front axle?
DANA 60 FRONT - FORD 1975 to 2004.
What Ford has a 8.8 rear end?
8.8 Solid Axle
Ford first used the 8.8 axle in 1983 model year trucks and is still in production for the Ford Ranger and Ford F-Series. It was also used in the Ford SUVs until Independent suspension replaced the solid axle.
Which TJ came with Dana 44?
Rubicon
Wrangler TJs have a few different options. The Sport/Sahara trim will always have a Dana 30 in the front whereas the rear has the option for a Dana 44 or Dana 35. The Rubicon option will always have a Dana 44 in both the front and rear.
Does Ford use Dana axles?
The Dana/Spicer Model 50 was an automotive axle manufactured by the Dana Holding Corporation for 25 years and was used solely in OEM Ford applications. Dana 50's were made as front axles only until it was revived in rear solid axle configuration in the 2022 Ford Bronco Raptor.
How do I know if I have a Dana 44 or Dana 60?
Measure Your Axle
Although the Dana 44 and Dana 60 differential covers look similar, their sizes are significantly different. The Dana 44 differential cover will measure about 9 1/2 inches wide and 10 1/2 inches tall, while the Dana 60 differential cover will measure about 11 1/4 inches wide and 12 inches tall.
What front axle is in a 2000 Ford Excursion?
2000-2005 Ford Excursion 4x4s use Dana 50 monobeam front axles. Externally, the Model 50 Axle looks almost exactly like a Dana 60 used on most of the Super Duty 4x4s of the same vintage, however, all the internal differential components are substantially smaller.
How do I know what Ford axle I have?
Step 1: Locate the Axle Code
View the Safety Compliance Certification Label on the driver's side, front or rear door panel. 2. Find the word AXLE under the bar code.
