What bolt pattern is 2016 fit?
The 2016 Honda Fit uses a 4x100 bolt pattern. That means four lug holes arranged on a 100 mm circle. This detail matters for selecting compatible aftermarket wheels or replacements.
Understanding bolt patterns helps you avoid buying wheels that won’t fit. The bolt pattern describes how many lug holes there are and the diameter of the circle on which they sit. If the pattern doesn’t match, you won’t be able to mount the wheel securely, and you may need adapters or different wheels.
Bolt pattern basics
Bolt pattern is defined by two main factors: number of lug holes and the distance between opposite holes (the circle diameter, also called PCD or bolt circle). For the 2016 Fit, you will be looking for a 4-on-100 mm pattern. Center bore and wheel offset also affect fitment and drive quality.
2016 Honda Fit wheel compatibility
When shopping for wheels, ensure the hardware and geometry line up with the Fit's specifications. The key checks listed below help determine compatibility.
To outline wheel compatibility for the 2016 Honda Fit, here are the essential checks:
- Bolt pattern: 4x100 (4 lug holes on a 100 mm circle)
- Center bore compatibility and hub-centric fit: the wheel's center bore should match the hub, or use hub-centric rings
- Offset and width: ensure the wheel offset and width stay within the manufacturer's recommended range to avoid rubbing or handling changes
- Lug nut size and seat type: confirm the lug nuts/bolts match your hub and the wheel's seat type (conical or spline) is compatible
With these checks, you can confidently select wheels that fit your 2016 Honda Fit without sacrificing safety or performance.
How to verify bolt pattern yourself
If you want to confirm the bolt pattern and fitment yourself, follow these steps:
- Park on a flat surface, set the parking brake, and chock the wheels.
- Inspect the wheel hub to count the number of lug studs; ensure there are four on the 2016 Fit.
- Measure the distance between two opposite lug studs through the center of the hub to determine the bolt circle diameter; for a four-lug Fit, this should be 100 mm.
- Check the wheel’s center bore size and see if it matches the hub bore; use hub-centric rings if needed.
- Compare the wheel offset and width with the manufacturer’s specifications for the 2016 Fit to prevent clearance issues.
Practicing precise measurement helps confirm compatibility and prevents fitment issues before purchasing wheels.
Summary: For a 2016 Honda Fit, the bolt pattern is 4x100. When selecting wheels, verify the bolt pattern, center bore, offset, width, and lug hardware. If in doubt, consult the owner's manual or a qualified tire/wheel shop.
