What bolt pattern is a Ford F150?
The Ford F-150 uses a 6-lug bolt pattern on a 135 mm bolt circle (6x135).
In practical terms, this means the wheels that fit an F-150 must have six lug holes arranged around a 135 mm circle. This pattern is standard on most recent F-150 generations, while Ford’s heavier-duty Super Duty trucks (such as the F-250 and F-350) use a different 8-lug pattern (8x170). For a precise fit, always confirm your specific year and trim from the owner's manual or the door placard.
Bolt pattern basics
Understanding bolt patterns helps you choose wheels that fit correctly and safely. For the F-150, the primary takeaway is a 6x135 pattern, but you should verify exact specs for your exact vehicle, especially if wheels have been swapped before.
Before listing quick-reference facts, here is a concise overview:
- Pattern: 6 lug holes
- Bolt circle diameter: 135 mm (approximately 5.31 inches)
- Common alternate naming: 6x135 or 6x5.31
- Center bore and hub-centric considerations matter for proper fitment
- Ford’s Super Duty lineup uses a different pattern: 8x170
In practice, most F-150 wheels advertised as 6x135 are compatible with the truck, while wheels in 8x170 will not fit without adapters or a different hub arrangement.
Model-year and compatibility notes
While the 6x135 pattern is the standard for the F-150 across many model years, it’s important to verify for your exact build. Differences can exist due to aftermarket wheels, trim-specific packages, or prior modifications.
- F-150: typically 6x135 bolt pattern across modern generations
- Super Duty (F-250/350, not the F-150): uses 8x170
- Aftermarket wheels: always confirm the pattern, center bore, and offset before purchase
Conclusion: When shopping for wheels or tires, choose items listed as 6x135 for an F-150 unless you have a reason to consider adapters or a different configuration, and always check center bore compatibility and offset.
Verifying the exact specification for your vehicle
To be certain about your truck’s bolt pattern, follow these checks:
- Consult the vehicle’s owner's manual or the door placard on the driver's side jam for wheel specs
- Physically count the lug holes on your current wheel to confirm six-lug configuration
- Measure the bolt circle diameter by measuring from the center of one lug hole to the center of the opposite lug hole
- Check the wheel hub bore size and consider center rings if needed for proper centering
Conclusion: If there’s any doubt, ask a dealer or a qualified tire/wheel shop to confirm the exact bolt pattern for your specific F-150 model and year before making a wheel change.
Practical notes on fitment
Center bore, offset, and lug nut/thread size can affect fitment even within the same bolt pattern. Always verify these details to avoid clearance issues or improper mounting.
- Center bore compatibility matters for proper centering
- Wheel offset should align with the vehicle’s suspension and fender clearance
- Thread size and lug nut seating must match the wheel and hub requirements
Summary: The Ford F-150 standard bolt pattern is 6x135, with the 8x170 pattern reserved for Ford Super Duty trucks. Always verify the exact spec for your year and trim, and consider center bore and offset when selecting wheels to ensure a safe and proper fit.
Summary
The Ford F-150 predominantly uses a 6-lug bolt pattern on a 135 mm bolt circle (6x135). This is the baseline for most modern F-150s, while the larger Super Duty line uses 8x170. To ensure a correct wheel fit, confirm the pattern on your specific truck via the owner’s manual or door placard, and check center bore and offset in addition to the bolt pattern before purchasing wheels.
