What brake fluid does a 2013 Dodge Avenger take?
The 2013 Dodge Avenger requires DOT 3 brake fluid. This type of brake fluid is the standard specification for most passenger vehicles manufactured in the 2000s and 2010s.
Brake Fluid Specifications for the 2013 Dodge Avenger
The 2013 Dodge Avenger, like many other vehicles from that era, calls for the use of DOT 3 brake fluid. DOT 3 is a glycol-based brake fluid that meets the minimum performance requirements set by the U.S. Department of Transportation (DOT).
Some key details about the brake fluid for a 2013 Dodge Avenger:
- Recommended Brake Fluid Type: DOT 3
- Minimum Boiling Point: 401°F (205°C) dry, 284°F (140°C) wet
- Fluid Capacity: Approximately 0.5 to 0.7 liters
- Replacement Interval: Every 2 years or 24,000 miles (38,000 km)
It's important to only use the recommended DOT 3 brake fluid and to replace it at the intervals specified by the manufacturer. Using the wrong type of brake fluid or letting it get too old can lead to issues with the brake system.
Why DOT 3 Brake Fluid?
DOT 3 brake fluid is widely used in passenger vehicles because it provides good performance and compatibility with the materials used in most brake systems. It has a relatively high boiling point, which is important for maintaining consistent braking under high temperatures.
The "DOT" designation means the fluid meets the safety standards set by the U.S. Department of Transportation. DOT 3 is one of several DOT-approved brake fluid specifications, with DOT 4 and DOT 5.1 being other common types used in more demanding applications.
For the 2013 Dodge Avenger, the automaker has specified DOT 3 as the appropriate brake fluid to use. Following this recommendation is important for ensuring the proper function and longevity of the vehicle's brake system.
