Loading

What color paint is my Ford truck?

The color of your Ford truck is defined by the factory exterior paint code shown on the vehicle’s label. Read that code and map it to Ford’s official color name for your exact year and model. If the truck has been repainted, the current appearance may differ from the original color indicated by the code.


Where to find the color code


Most Ford trucks carry an exterior paint color code on a label attached to the driver’s door jamb. If that spot doesn’t reveal the code, try other common locations and documents listed below.



  • Driver-side door jamb sticker or door edge label

  • Under-hood or radiator support area (on some models)

  • Inside the glove box label or the passenger-side door jamb label on certain years

  • Original window sticker or Monroney label from when the vehicle was new

  • VIN-based build sheet or production documents obtained from a dealer


Because locations can vary by year, trim level, and regional specifications, it’s wise to check multiple spots and keep a photo of the label for reference. If the label is missing or unreadable, a Ford dealer can pull the color code using the VIN and model year.


Common label locations for Ford trucks


In many F-Series trucks, the paint code appears on the driver’s door jamb label along with other manufacturing details. Some models may place the code on the radiator support or inside the glove box. If you’re unsure, take a photo of any label you find and compare it to your vehicle’s year-specific labeling guide.


How to read the color code and identify the color


After locating the code, you’ll need to translate it to the official Ford color name for your year and model. Ford publishes color-code charts that map two- or three-character codes to color names. If you’re not sure which chart applies, your dealer can confirm it for you using the VIN.



  • Copy the exterior color code exactly as it appears on the label

  • Consult Ford’s year-specific color chart or ask a dealer to translate the code

  • Verify the color by cross-checking with the original window sticker or production documents


Note that lighting conditions, fading, or prior repainting can affect how a color looks in person. The code should always be used to confirm the official color name rather than relying on a visual guess.


What to do if your truck has been repainted


A repaint can introduce a shade that differs from the factory color. In such cases, the current finish may not match the original Ford color indicated by the paint code. Here’s how to proceed if you suspect a repaint.



  • Compare the current color to the factory shade options for your model year

  • Ask a dealer or body shop to run a color match against a sample from Ford’s palette

  • Keep record of the original color code and any repaint paperwork for future reference


For precision touch-ups or panel replacements, providing the original factory color code and name helps ensure a closer match, even if the vehicle’s appearance has changed over time.


Getting the exact color name quickly


If you want a fast answer without digging through labels, these methods can help verify the color name efficiently.



  • Contact a Ford dealer and provide the VIN, year, and model to retrieve the color code and name

  • Check the original window sticker or, if unavailable, request a build sheet from Ford or a reputable service

  • Use a professional color-matching tool or bring a paint chip to a body shop to compare against Ford’s catalog


These approaches reduce guesswork and improve accuracy when ordering touch-up paint or planning maintenance.


Summary


To determine your Ford truck’s color, locate the exterior paint color code on the vehicle’s label (typically the driver’s door jamb), then map that code to Ford’s official color name for your year and model. If the label is missing or the truck has been repainted, consult a Ford dealer using the VIN or original documentation to confirm the exact color. In practice, the factory color code is the reliable reference point, while the visible paint on the surface may vary due to aging or repairs.

How do I find out the exact color of my truck?


Google Search cannot see your truck, so it cannot tell you its color. You can find the color by locating the vehicle's paint code on a sticker or plate inside the driver's side door jamb, or by using the VIN to look up the information online. 
How to find the paint code on your truck

  • Open the driver's door: The most common place to find a sticker with the paint code is on the door jamb or pillar, near the bottom. 
  • Look for a VIN and color code: On the sticker, you may find the VIN and the color and trim information. 
  • Check other locations: If you can't find it on the door jamb, check the following places: 
    • Inside the glove box 
    • Near the VIN number on the windshield (from the outside) 
    • Under the passenger's side sun visor 
    • Under the trunk floor or on the trunk lid 
    • In the spare tire well

Alternative methods
  • Use the VIN: Some websites have VIN lookup tools that can provide the paint code, though you may need to find a site that guarantees accuracy.
  • Check your owner's manual: The manual may contain a sticker with the paint code. 



How do I tell what color my Ford truck is?


Find your vehicle's paint code located on your vehicle's door jamb label. The exterior paint code will be labeled as EXT PNT followed by two characters. Note: Older vehicles may have more than two characters. Access the Motorcraft Chemicals and Lubricants Quick Reference Charts.



How do I find the color of my Ford?


To find the color of your Ford, locate the paint code on the sticker on the driver's side door jamb, which is usually labeled "EXT PNT". This code, a combination of letters and numbers, can then be used to look up the exact color name on a website or in a chart. Alternatively, you may be able to find the color by searching your car's registration number online.
 
How to find the paint code on your Ford

  • Check the driver's side door jamb: Open the driver's side door and look for a manufacturer's sticker on the door frame, often near the bottom. This label will have the exterior paint code, usually indicated by "EXT PNT" followed by a two-character code. 
  • Look under the hood: Some Ford models may have the paint code on a sticker located under the hood, such as near the suspension mount or on the front panel. 
  • Check the boot: The code may also be found on a sticker in the boot, either on the floor or on the lid. 

How to find the color using the paint code
  • Use an online tool: Enter your vehicle's year, make, and model on a website like Dupli-Color to find the color code, or use the code you found on your car. 
  • Use a Ford reference chart: Visit the FCSD Chemicals and Lubricants website and search for the "Motorcraft® Lacquer Touch-up Paints Cross-Reference Chart" to find the color name and part number associated with your code. 

Alternative method: Use your registration number 
  • If you cannot find the sticker, you can often look up your Ford's paint color by entering its registration number on a website like this one from PaintNuts. 



How to tell paint color from VIN?


You can't get the paint color directly from a VIN, but you can use the VIN to look up your car's original paint code by contacting a dealership or using an online VIN decoder. The most common and fastest way to find the paint code is to check the sticker located in the driver's side door jamb, which often has a label for "paint code," "ext pnt," or "body color code". 
Methods to find your paint color
This video demonstrates how to find the paint code on various car models: 56sJoe Beermaster The Car MasterYouTube · Apr 5, 2017

  • Check the driver's door jamb: Open the driver's side door and look for a sticker on the door or the car's body (B-pillar). This is the most common location for a label with the paint code. 
  • Look for a sticker elsewhere: The code may also be located on a sticker inside the glove box, on a visor, or in the owner's manual. 
  • Contact a dealership: Call the parts department of your car's dealership and provide them with the VIN. They can look up the exact paint code and even provide the paint formula. 
  • Use an online VIN decoder: Some online services can decode a VIN and provide details like the paint code, especially if you can't find the physical sticker on the car. 
  • Consult your service history or owner's manual: The paint code should be listed in your vehicle's service history or owner's manual. 


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.