What engine came in the 1986 C10?
The 1986 Chevrolet C10 pickup truck was powered by a variety of engine options, but the most common was the 4.3-liter V6 engine. This engine, known as the Vortec 4300, was a reliable and efficient powerplant that provided ample power for the C10's hauling and towing needs.
The Vortec 4300 V6 Engine
The Vortec 4300 V6 engine was a 4.3-liter, overhead valve (OHV) engine that was introduced in the 1986 model year. It was part of Chevrolet's Vortec engine family, which was known for its improved fuel efficiency and power output compared to previous V6 engines. The Vortec 4300 produced 155 horsepower and 240 lb-ft of torque, which was a significant improvement over the previous 4.1-liter V6 engine that was offered in the C10.
The Vortec 4300 engine featured a cast-iron block and cylinder heads, as well as a two-barrel carburetor. It was available with either a four-speed manual transmission or a three-speed automatic transmission, depending on the C10 model and trim level.
Other Engine Options
While the Vortec 4300 V6 was the most common engine option for the 1986 C10, Chevrolet also offered a few other engine choices:
- 5.0-liter V8 engine, producing 165 horsepower and 255 lb-ft of torque
- 5.7-liter V8 engine, producing 210 horsepower and 300 lb-ft of torque
- 6.2-liter diesel V8 engine, producing 130 horsepower and 240 lb-ft of torque
These alternative engine options were typically found in higher-trim C10 models or in models equipped for heavy-duty towing and hauling applications.
Conclusion
The 1986 Chevrolet C10 was a popular and capable pickup truck, and the Vortec 4300 V6 engine was a key component of its success. This engine provided a good balance of power, efficiency, and reliability, making it a popular choice for C10 owners at the time.
What trucks did Chevy make in 1986?
Select a 1986 Chevrolet Truck Model
- 1986 Astro.
- 1986 Blazer.
- 1986 C10.
- 1986 C20.
- 1986 C30.
- 1986 El Camino.
- 1986 G10 Van.
- 1986 G20 Van.
What is the difference between a 1986 Chevy K10 and C10?
The main difference between the C10 and K10 is that the K10 is four-wheel drive, while the C10 is two-wheel drive. The K10 also has a slightly different suspension package and sits higher than the C10 due to the drivetrain configuration. As the K10 is a 4x4, it is more frequently used off-road compared to the C10.
What year is the most desirable C10?
4. What year C10 is the most popular? Q: What year C10 is the most popular? A: The 1973-1987 models, known as the "Square Body" generation, are often considered the most popular among enthusiasts.
What engines were available in the 1987 C10?
Engine options were plentiful. Buyers could choose from a 250-cubic-inch in-line six (100 hp), a 292-cube six (120 hp), a 307 V-8(115 or 130 hp), a 350 V-8(155 hp), and the all-new, range-topping 454 big-block V-8 (240 hp).
What engine does a 1986 C10 have?
4.3L V6
Under the hood in a clean and original unrestored engine bay now sits a 4.3L V6 crate engine. On top of a Quadrajet 4 barrel carburetor and on back is a TH400 3 speed automatic transmission. The rear axle is a 10 bolt version from Chevy.
What engine did the C10 have?
Q: What engine did the C10 have? There were numerous choices for the buyer when going after a new Chevy C10, but the two most common were the 230 and 292 inline six-cylinder engines, with some opting for more power with the 283 or 350 V-8.
What is a 1986 Chevy C10 worth?
The value of a 1986 Chevrolet C10 1/2 Ton can vary greatly depending on its condition, mileage, options, and history. Typically, you can expect to pay around $10,367 for a 1986 Chevrolet C10 1/2 Ton in good condition with average spec.
What engine is in a 1987 Chevy C10?
What makes the 1987 Chevy truck models so special is that it was the last year for the classic bodylines, but the first year you could get fuel injection. This gives the new create 350 cubic-inch V8 under the hood a real advantage for usability and performance.
What year did 700R4 come out?
The four-speed Turbo Hydra-Matic 700R4 was introduced for the 1982 model year for use in Chevrolet/GMC vehicles.
What engine came in the 1985 Chevy C10?
Sevel Argentina built the Chevrolet C10 in its Córdoba plant from 1985 to 1991. The gasoline version used the Chevy 250 CID engine (4,093 cc) familiar to most Latin American markets, producing 130 hp (96 kW).
