What engine does a 74 C10 have?
The 1974 Chevrolet C10 pickup truck was powered by a variety of engine options, but the most common was the 350 cubic inch (5.7 liter) V8 engine. This engine was a staple of Chevrolet's truck lineup during the 1970s and provided a good balance of power and fuel efficiency for the C10.
Engine Specifications
The 350 V8 engine in the 1974 C10 had the following key specifications:
- Displacement: 350 cubic inches (5.7 liters)
- Horsepower: 145 hp at 3,800 rpm
- Torque: 255 lb-ft at 2,400 rpm
- Compression Ratio: 8.2:1
- Fuel System: Carburetor
This engine was a reliable and durable workhorse that provided ample power for hauling and towing with the C10 pickup. It was available with either a 3-speed manual or 3-speed automatic transmission.
Other Engine Options
While the 350 V8 was the most common engine, the 1974 C10 was also available with a few other engine choices:
- 250 cubic inch (4.1 liter) inline 6-cylinder engine (110 hp)
- 400 cubic inch (6.6 liter) V8 engine (175 hp)
- 454 cubic inch (7.4 liter) V8 engine (235 hp)
The 6-cylinder and larger V8 options provided either better fuel economy or more towing/hauling capability, depending on the buyer's needs. However, the 350 V8 remained the most popular and widely-used engine in the 1974 Chevrolet C10 pickup.
What engine did the C10 have?
Q: What engine did the C10 have? There were numerous choices for the buyer when going after a new Chevy C10, but the two most common were the 230 and 292 inline six-cylinder engines, with some opting for more power with the 283 or 350 V-8.
Are a 7.4 and a 454 the same engine?
Chevy's 7.4L (454 ci) big-block engine was offered in many production vehicles from 1970 to 2001 and is still available today as a crate variant. Much of the engine's popularity stems from its impressive horsepower and torque output and solid reliability.
What year is a 427 Chevy?
427. The highly successful and versatile 427 cu in (7.0 L) version of the Mark IV engine was introduced in 1966 as a production engine option for full-sized Chevrolets and Corvettes.
How much is a 1974 Chevy C10 worth?
The value of a 1974 Chevrolet C10 1/2 Ton can vary greatly depending on its condition, mileage, options, and history. Typically, you can expect to pay around $13,638 for a 1974 Chevrolet C10 1/2 Ton in good condition with average spec.
How many miles per gallon does a 1974 Chevy C10 get?
12.08
Based on data from 3 vehicles, 137 fuel-ups and 17,190 miles of driving, the 1974 Chevrolet C10 Pickup gets a combined Avg MPG of 12.08 with a 0.29 MPG margin of error. Below you can see a distribution of the fuel-ups with 12 outliers (8.05%) removed.
How much horsepower does a 1974 454 have?
270 hp @ 4400 RPM
What year is the most desirable C10?
4. What year C10 is the most popular? Q: What year C10 is the most popular? A: The 1973-1987 models, known as the "Square Body" generation, are often considered the most popular among enthusiasts.
What does C10 stand for?
C10, This nomenclature was used by Chevrolet to distinguish their line of pickup trucks throughout the 1960s to the 1980s. The "C" in C10 stands for "Conventional" in reference to the truck's two-wheel-drive system, while the "10" refers to the half-ton rating of the truck's payload capacity.
What engine is in a 1974 Chevy truck?
Powertrain
| Chevrolet/GMC C/K powertrain details (1973–1991) | ||
|---|---|---|
| Engine | Engine family | Production |
| 250 cu in (4.1 L) I6 | Chevrolet Turbo-Thrift | 1973–1979 |
| 1979–1984 | ||
| 262 cu in (4.3 L) V6 | Chevrolet 90° V6 | 1985–1986 |
What Chevys had a 427 engine?
Vehicles Found With "427 Ci/425 Hp (l72)" as Engine
- 1969 Chevrolet. Chevelle Yenko.
- 1969 Chevrolet. Camaro Yenko.
- 1966 Chevrolet. Biscayne L72.
- 1969 Chevrolet. Camaro COPO.
- 1969 Chevrolet. Camaro Yenko.
- 1969 Chevrolet. Chevelle Yenko.
