What engine is in a 1979 Ford F-150?
The 1979 Ford F-150 was equipped with a variety of engine options, but the most common was the 300 cubic inch (4.9 liter) inline six-cylinder engine. This robust and reliable engine was a staple in many Ford trucks during the late 1970s and early 1980s.
Engine Specifications
The 300 cubic inch (4.9 liter) inline six-cylinder engine in the 1979 Ford F-150 had the following key specifications:
- Displacement: 300 cubic inches (4.9 liters)
- Horsepower: 130 hp at 3,400 rpm
- Torque: 210 lb-ft at 1,600 rpm
- Compression Ratio: 8.0:1
- Fuel System: Carburetor
This engine was known for its durability, reliability, and torque output, making it well-suited for the demands of truck use. It was a popular choice among Ford truck owners during this era.
Other Engine Options
While the 300 cubic inch inline six-cylinder was the most common engine, the 1979 Ford F-150 was also available with other engine options, including:
- 302 cubic inch (4.9 liter) V8 engine
- 351 cubic inch (5.8 liter) V8 engine
- 400 cubic inch (6.6 liter) V8 engine
These larger V8 engines offered more horsepower and torque, but the inline six-cylinder remained a popular choice for its balance of power, fuel efficiency, and reliability.
How much horsepower does a 4.9 straight 6 have?
Horsepower: Around 117 to 120 horsepower at 3,000 RPM (varies by year and application) Torque: Approximately 223 to 260 lb-ft at 1,600 RPM (varies by year and application)
What engine does a 1979 Ford F-150 have?
4.9L Inline-6 (300 CID): This engine was the base option for many F-150s, known for its reliability and decent fuel efficiency for the time. It produced around 114 horsepower and 223 lb-ft of torque.
What year is best F-150 ever made?
Top Five Model Years for the Ford F-150
- 2010 Ford F-150. The 2010 Ford F-150 is special in particular as it was the first model year for the SVT Raptor.
- 2011 Ford F-150. 2011 was a milestone year for the F-150.
- 2014 Ford F-150.
- 2015 Ford F-150.
- 2018 Ford F-150.
What is a 1979 Ford truck called?
Dentside is the 6th generation Ford truck body style --1973-1979. Styleside in the Ford trucks is the equivalent to the Fleetside in the Chevrolets.
How much is a 1979 Ford F-150 worth?
Typically, you can expect to pay around $23,744 for a 1979 Ford F-150 1/2 Ton in good condition with average spec.
What is a 351M Ford engine?
The 351M was essentially a destroked version of the 400 c.i.d. engine. The 351M and 400 were available in cars until 1979. They were also offered in trucks until 1982. These engines can share a lot of parts. However, they do have significant differences.
Is a 351 windsor the same as a 302?
The main difference between the blocks was the Deck Height . The 351 blocks were as much as 1.300 in. taller to allow for a longer Stroke . You can spot the difference pretty easily by looking at the front of the engine.
Is the Ford 4.9 inline 6 a good engine?
Best Answer The 4.9l, otherwise known as the Inline 6 or 300 6 is a very reliable motor. You keep thick oil in it and it'll run forever. I've got a 67 F100 with the inline six and I will admit, I do burn around in it every now and again. But not alot.
How much horsepower does a 1979 Ford F-150 302 have?
Powertrain
| Engine | Years | Power (SAE net) |
|---|---|---|
| 302 CID small block V8 | 1973–79 | 130 hp (97 kW) |
| 360 CID FE V8 | 1973–76 | 143 hp (107 kW) |
| 390 CID FE V8 | 1973–76 | 161 hp (120 kW) |
| 460 CID 385 V8 | 1973–79 | 200–239 hp (150–162 kW) |
When did Ford stop making the 4.9 inline 6?
1996
Production ended in 1996, making it the last inline-six gasoline engine offered in a Ford car or light truck in North America. It was replaced by the 4.2 L Essex V6 for 1997 in the redesigned F-150, as well as the E-150 and E-250.
