What engines were available in the 1960 GMC truck?
The 1960 GMC truck offered a range of engine options to meet the diverse needs of its customers. From powerful V8 engines to efficient inline-six options, the 1960 GMC lineup provided a variety of choices for truck buyers.
V8 Engine Options
The 1960 GMC truck was available with two V8 engine choices. The first was a 283 cubic inch (4.6-liter) V8 that produced 160 horsepower. This engine was a carryover from the previous model year and provided a solid balance of power and efficiency.
The second V8 option was a larger 348 cubic inch (5.7-liter) V8 that generated 220 horsepower. This engine offered more power for those who needed to haul heavier loads or tow trailers. The 348 V8 was a popular choice among customers who prioritized performance.
Inline-Six Engine
In addition to the V8 options, the 1960 GMC truck also offered an inline-six engine. This 236 cubic inch (3.9-liter) six-cylinder engine produced 135 horsepower, making it a more fuel-efficient choice for light-duty applications.
The inline-six engine was a reliable and durable option that provided a balance of power and economy, appealing to customers who did not require the full capabilities of the V8 engines.
Transmission Choices
- The 1960 GMC truck was available with both manual and automatic transmission options to suit different driving preferences and needs.
- The manual transmission choices included a 3-speed and a 4-speed, allowing drivers to have more control over the power delivery.
- For those who preferred a more effortless driving experience, the 1960 GMC truck could be equipped with a 4-speed Hydra-Matic automatic transmission.
The variety of engine and transmission choices in the 1960 GMC truck lineup allowed customers to select the configuration that best suited their specific requirements, whether it was hauling heavy loads, towing trailers, or prioritizing fuel efficiency.
When did Chevy put LS engines in trucks?
The LS1 debuted in the 1997 Corvette and moved to the Camaro in 1998. In 1999, different versions of the LS design, such as iron blocks with varying displacements, started showing up in trucks and SUVs.
What size were the old GMC engines?
By the mid 70's, GMC was using the same engines as Chevy in their mediums: 292 (6), and V-8's 350, 366, 427 CID. Before 1960, when GMC went to the V-6, there were a plethora of inline sixes with rounded valve covers: 228, 248, 270, 302, 360, 426, and 503 cubic inches.
When did GM start using Vortec engines?
General Motors invented the Vortec engine line, which included I4, I5, I6, V6, and three V8 variants, in the mid-1990s. When talking about Vortec engines, you're mostly talking about the 5.0L/5.7L machines based on the earliest 1955 Small-Block Chevy V8.
How do I identify my GMC engine?
The vehicle identification number (VIN) is located on the left side rear of the engine block (1) and is typically an 11 digit number stamped or laser-etched onto the engine at the vehicle assembly plant. The first digit identifies the division. The second digit identifies the model year.
What was the 6 cylinder in the 1950 GMC?
The 1950 GMC base engine for the half-ton pickup was the 228-cubic-inch in-line six-cylinder. In contrast, the base Chevrolet model featured the smaller 216.5-cubic-inch straight-six. Most trucks of the vintage era were used hard and ran to the end of their life.
What engine came in the 1960 Chevy truck?
For 1960, C/K pickup trucks were powered by three different engines. A 236 cubic-inline 6 (producing 135 hp) was the standard engine for Chevrolet trucks, with a 305 cubic-inch V6 (producing 150 hp) as standard for GMC trucks; a 283 cubic-inch V8 was optional, producing 160 hp.
What were the names of the 1960 Chevy trucks?
Chevrolet C/K
| Generation | Model | Start of production |
|---|---|---|
| First generation | C-20 | 1960 |
| Apache | 1960 | |
| Apache Crewcab | 1960 | |
| Second generation "Action Line" | C-10 | 1967 |
What engine is in a 1958 GMC truck specs?
basic engine data are as follows: The new GMC 336 cubic inch engine is an eight- cylinder, valve-in-head 90° V-type furnished with either clutch or synchromesh transmission, Hydra-Matic transmission or with Allison Torq- matic transmission.
What motors were in the 50s GMC trucks?
The 301.6-cubic-inch (4.9 L) GMC inline six was produced from 1952 to 1960, when it was replaced by the V6. It has a square bore/stroke ratio of 4 by 4 inches (101.6 mm × 101.6 mm). This is the largest raised-deck engine.
What years did GMC use Pontiac engines?
From 1955 through 1959, the Pontiac V8 was also used in some GMC pick-up trucks including the 1958/59 336 cubic-inch versions of the 370CI and 389CI engines.
