What is the bolt pattern for a 2000 S10?
The 2000 S-10 uses a 5-lug wheel pattern on a 4.75-inch bolt circle (5x4.75 inches, about 120.65 mm).
In practical terms, that means wheels marketed as 5x4.75" will fit the 2000 S-10, while wheels with other bolt patterns won’t mount correctly without adapters or modifications. This article explains the specification, what to check when shopping for wheels, and how to verify fit before you buy.
Bolt pattern specifics for the 2000 S-10
Key facts to know before shopping for wheels for this model are summarized below.
- Bolt pattern: 5-lug on a 4.75-inch circle (5x4.75 in / 120.65 mm).
- Lug count: 5 lugs.
- Common usage: This pattern is standard for the Chevrolet S-10 (and other GM mid-size trucks of that era).
- Wheel compatibility note: Most aftermarket wheels labeled 5x4.75" will fit, but always verify hub bore size and lug nut type for your exact vehicle.
Bottom line: for a 2000 S-10, the essential specification to confirm when selecting wheels is the 5x4.75" bolt pattern along with hub bore and lug nut requirements.
Verification and practical considerations
Before purchasing new wheels or adapters, use these steps to confirm fitment and avoid surprises at install.
- Identify the wheel bolt circle: ensure it is 4.75 inches (120.65 mm) with five evenly spaced lug holes.
- Check the number of lugs: confirm the vehicle uses five lug nuts per wheel.
- Measure or confirm the center bore (hub bore) size to ensure a proper fit on the hub or determine if a hub-centric ring is needed.
- Verify lug nut size and thread pitch compatible with your vehicle’s studs and wheel design.
- Confirm brake caliper clearance and wheel offset/width to avoid rubbing and clearance issues.
Following these checks helps ensure the wheels you buy will mount correctly and operate safely on a 2000 S-10.
Practical tips for wheel shopping
When shopping for wheels for a 2000 S-10, keep these tips in mind to streamline the process and avoid common pitfalls.
- Look for wheels labeled 5x4.75" (5x120.65 mm) to match the bolt pattern.
- Ask the seller for the center bore size and confirm if hub-centric rings are required for precise fitment.
- Check offset guidelines to maintain proper brake clearance and suspension geometry; improper offset can cause fitment problems.
- Consult your vehicle’s manual or a trusted parts specialist if you’re unsure about compatibility with trims, brake upgrades, or tire sizes.
With careful verification of pattern, bore, and offset, you’ll minimize fitment risks and find wheels that suit the 2000 S-10’s styling and performance needs.
Summary
The bolt pattern for a 2000 S-10 is five lug on a 4.75-inch circle (5x4.75" / 120.65 mm). When replacing wheels, verify the bolt pattern, center bore, lug nut size, and offset to ensure proper fitment and safe operation.
What does the 4x108 bolt pattern fit?
The 4x108 bolt pattern is commonly used by vehicle brands such as Mazda, Ford, Saab, Mercury, Volvo, and many more. Wheel sizes that we carry for this bolt pattern are 15, 16, 17, and 18-inch wheels. Our large selection of wheel finishes, designs, and colors can help you truly customize your vehicle.
What's the bolt pattern on a S10?
The S10 features the same bolt pattern (5 x 4.75") as all other GM 2-wheel-drive vehicles dating back to the early 1970s.
What cars use the 6x120 bolt pattern?
Vehicles that commonly use the 6x120 bolt pattern include: Buick Enclave, Cadillac SRX, Cadillac XT5, Chevrolet Colorado, Chevrolet Traverse, GMC Canyon, and Saab 9-4X.
What's the lug pattern for a 2000 S10?
Bolt pattern: 5 lug with a 4.75" bolt circle diameter.
