What is the bolt pattern for Acura?
There isn’t a single bolt pattern for the entire Acura brand. The most common pattern across many modern Acuras is 5 lug on a 114.3 mm circle, while some older or niche models use 4 lug on 100 mm. Always verify the exact specification for your specific model and year.
Overview of Acura bolt patterns
Acura wheel patterns vary by generation and model. The two patterns you’re most likely to encounter are 5x114.3 mm and 4x100 mm. The 5x114.3 pattern is widespread on many current sedans and SUVs, while 4x100 appears on older or less common configurations. Confirming the exact pattern for your vehicle helps ensure proper wheel fitment and safety.
- 5 on 114.3 mm (5x114.3) bolt pattern — the most common pattern on many newer Acura models.
- 4 on 100 mm (4x100) bolt pattern — used on some older Honda/Acura vehicles.
When selecting wheels, also consider center bore size, lug nut size and thread pitch, as well as wheel offset, since these dimensions affect installation and clearance.
How to confirm the exact bolt pattern for your Acura
Use a reliable verification method to confirm the bolt pattern before purchasing wheels or adapters. The steps below guide you through a quick check.
- Consult the owner's manual or official specifications for your exact model and year to find the listed lug pattern.
- Count the lug holes on your current wheels and measure the distance across the lug holes (the bolt circle or PCD).
- Measure the center bore diameter on your hub and ensure the new wheels have a compatible bore (or plan for hub-centric rings).
- If in doubt, contact a dealer or use a VIN-based parts lookup to fetch the exact wheel specs for your vehicle.
Following these steps helps ensure you select wheels that fit safely and perform as intended.
Why the bolt pattern matters for your Acura
The bolt pattern determines whether a wheel can physically mount to the hub. A mismatch can cause unsafe seating, vibrations, or brake clearance issues. In addition to lug count and spacing, pay attention to center bore size and wheel offset, which influence alignment and clearance with brake components.
Summary
In summary, Acura does not have a single universal bolt pattern. The most common pattern in recent years is 5x114.3 mm, with 4x100 appearing on some older models. Always verify the exact specifications for your model and year via the owner's manual, dealer resources, or VIN-based lookups, and consider center bore, lug nut size, thread pitch, and offset to ensure proper fitment and safety.
