What is the bolt pattern on a 2008 Chevy Traverse?
The 2008 Chevy Traverse uses a 5-lug bolt pattern on a 115 mm bolt circle (5x115) with a 66.0 mm center bore. This specification is shared by the GM Lambda platform siblings, including the Buick Enclave, GMC Acadia, and Saturn Outlook.
Note: The Traverse debuted as a 2009 model year in most markets, but the wheel mounting specs are representative of the generation and apply to the Lambda-family SUVs. When shopping for wheels or tires, always confirm the 5x115 bolt pattern and the correct center bore to ensure proper fit and alignment.
Bolt pattern specifications
Below are the core specifications you need to verify wheel compatibility for a 2008 Traverse and its Lambda-platform relatives.
- Bolt pattern: 5 on 115 mm (5x115) — five lug holes arranged on a 115 mm circle
- Center bore (hub bore): 66.0 mm
- Lug nut size and seat: typically M14x1.5 with a conical (60-degree) seat
- Wheel compatibility note: Most OEM and aftermarket wheels labeled 5x115 will fit, but always check offset and brake clearance
When replacing wheels, it's important to consider factors beyond the bolt pattern, such as wheel offset, width, and brake caliper clearance, to ensure proper fit and avoid rubbing or steering issues.
Additional compatibility considerations
For aftermarket wheels, verify that the center bore is large enough to center on the hub. If the wheel has a smaller bore, you may need hub-centric rings. Also confirm the recommended wheel offset for the Traverse to maintain proper suspension and steering geometry.
Summary
In short, the 2008 Traverse (Gen Lambda) uses a 5x115 bolt pattern with a 66.0 mm center bore, a configuration shared with its GM Lambda siblings. This specification is essential for wheel selection and must be paired with correct offset, width, and hub considerations for a safe, proper fit.
