What is the bolt pattern on a 2010 Honda Civic?
The bolt pattern is 5x114.3 mm (5 on 114.3 mm, or 5x4.5 inches). This means there are five lug holes arranged on a circle with a diameter of 114.3 millimeters, a standard specification for this model.
What the numbers mean for your wheels
In simple terms, "5x114.3" indicates five lug holes, and the circle that passes through the centers of those holes is 114.3 millimeters in diameter. For the 2010 Civic, this is the factory-typical pattern and is shared with many Honda and Acura models from around that era.
Technical specifics you can rely on
Beyond the bolt pattern, you should know the hub bore and lug details to ensure proper fit. The 2010 Civic commonly uses a hub bore of 64.1 mm and lug hardware that accepts M12x1.5 threads. When shopping aftermarket wheels, always verify offset, center bore, and lug-holes alignment to avoid clearance or seating issues.
How to verify compatibility (steps)
To confirm whether a wheel fits your 2010 Civic, follow these steps:
- Check the vehicle's owner's manual or a trusted fitment guide for the exact bolt pattern and hub bore for your trim.
- Measure the bolt circle on your current wheels by drawing a circle through the centers of opposite lug studs and measuring its diameter.
- Confirm that the wheel center bore can fit over the hub; if the wheel bore is larger, use a hub-centric ring; if smaller, the wheel will not seat correctly.
- Ensure the wheel offset and width are within the Civic’s acceptable range to avoid rubbing or clearance issues.
Following these steps helps ensure you select wheels that fit securely and perform safely on your Civic.
Cross-compatibility and cautions (notes)
Some wheels from other models or brands also use the 5x114.3 pattern, but fit depends on offset, center bore, and clearance. Keep these cautions in mind when shopping for wheels across brands or generations.
- 5x114.3 is common among many Honda and Acura models, but offsets and hub-bore requirements vary between generations and trims.
- Even if a wheel matches the bolt pattern, an incompatible offset or hub bore can cause rubbing or improper seating.
- Always verify wheel specs with the seller or a professional and consider using a fitment calculator or dealership guidance before purchasing.
With due diligence, you can confidently choose wheels that match the Civic’s bolt pattern while maintaining safety and performance.
Conclusion
Key takeaway: The 2010 Honda Civic uses a 5-lug, 114.3 mm bolt pattern (5x114.3) with a center bore of about 64.1 mm. When buying wheels, also check center bore, offset, width, and lug-nut specifications to ensure a proper fit and reliable road performance.
Summary
For a 2010 Civic, look for wheels with a 5x114.3 bolt pattern (5 on 114.3 mm) and a hub bore of 64.1 mm. Verify offset and lug details to guarantee compatibility and safe operation.
