What is the bolt pattern on a Dodge Coronet?
The Dodge Coronet generally uses a 5-lug wheel on a 4.5-inch bolt circle (5x114.3 mm). This pattern covers most Coronet models across its production life, but there are year-to-year variations and market-specific variants, so you should confirm for your exact car.
Bolt pattern basics
To understand what the term means for your vehicle, note that the bolt pattern describes how far apart the lug holes are on the wheel hub and how many holes there are. For most Dodge Coronet models, the standard fitment has five lug holes on a 4.5-inch circle, which matches many Mopar wheels of the era.
- Most Coronet models use 5 lug holes on a 4.5 inch circle (5x114.3 mm).
- Some years or market variations may differ; always verify the exact pattern for your specific car.
- When replacing wheels, also consider hub bore size and wheel offset to ensure proper seating and clearance.
Before you rely on memory, check the actual lug pattern on your car to avoid mismatches.
In short, the common pattern is 5x114.3 mm, but exceptions exist. Verifying with measurements or official documentation helps avoid fitment issues.
How to verify your Dodge Coronet bolt pattern
The following steps give you a practical method to confirm your car’s bolt pattern.
- Look at the wheel to count lug holes; most Coronet wheels use five lug holes. If there are four or six, you are looking at a different pattern.
- Measure the bolt circle diameter (BCD) by measuring from the center of one lug hole to the center of the lug hole directly opposite. Use the straight line across the hub.
- Record the measurement in inches or millimeters. The common Mopar pattern is 4.5 inches (114.3 mm).
- Cross-check the measurement with your vehicle’s year, trim, and a Mopar parts reference or a reliable wheel-fit guide to confirm the exact pattern.
- If you plan to fit wheels with a different pattern, consider adapters or professional advice; be aware adapters can affect safety and alignment.
These steps will help you identify the correct bolt pattern for your Dodge Coronet and avoid wheel-fit problems.
Summary
The Dodge Coronet most often uses a 5-lug on a 4.5-inch bolt circle (5x114.3 mm). While this is the standard for many generations, always verify for your specific model and year using measurements or official documentation to ensure proper wheel compatibility.
