What is the bolt pattern on a Hellcat?
The Dodge Hellcat, including the Challenger and Charger variants, uses a 5-lug bolt pattern with a 114.3 mm bolt circle (often written as 5x114.3). The typical center bore is 71.5 mm. This pattern covers most stock and aftermarket wheels for these cars across recent model years. Always verify the exact spec for your specific year and trim before purchasing wheels or adapters.
Understanding why bolt pattern matters
The bolt pattern determines whether a wheel can be mounted to a hub without modifications. For Hellcat models, sticking to the correct 5x114.3 pattern helps ensure proper fit, safe alignment, and reliable centering. In addition to the bolt circle, center bore size and brake caliper clearance are important considerations when selecting wheels.
Hellcat bolt pattern specifics
Bolt circle and lug count
All Hellcat variants of the Challenger and Charger use a 5-lug design with a 114.3 mm bolt circle. In inch terms, this is commonly described as 5x4.5 inches. This standard is shared across typical modern Mopar platforms for these cars.
Center bore and hub rings
The standard center bore for Hellcat wheels is 71.5 mm. If a wheel’s bore is larger, a hub ring can be used to center the wheel properly; if it’s smaller, the wheel won’t mount correctly on the hub without modification.
Offset and brake clearance
Offset and spoke design vary by wheel model and year, and Hellcats’ large Brembo brake kits can affect clearance. Always check the specific wheel’s offset and ensure it clears the brake calipers and fenders for your exact configuration.
How to verify your wheels fit
Before purchasing wheels or adapters, use the following steps to confirm compatibility with your Hellcat:
- Check the vehicle’s official spec sheet or owner’s manual for the wheel pattern (5x114.3) and center bore (71.5 mm).
- Measure the lug pattern on your current wheels by counting lugs (should be 5) and measuring the circle diameter across opposite lug holes (114.3 mm).
- Measure the center bore of the hub and compare it to the wheel’s bore; use a hub ring if the wheel bore is larger.
- Confirm brake clearance and offset compatibility with your chosen wheel design to avoid rubbing or caliper interference.
If any of these specifications don’t match, consult the wheel manufacturer or a knowledgeable retailer to explore correct adapters or alternative wheel options for your Hellcat.
Additional considerations for aftermarket wheels
When shopping outside the stock wheel lineup, you’ll frequently encounter wheels advertised as compatible with 5x114.3. Always cross-check the exact offset, center bore, and brake clearance for your model year and trim (e.g., Challenger SRT Hellcat, Hellcat Redeye, or Jailbreak) to ensure a proper, safe fit.
Summary
In short, Hellcat models typically use a 5x114.3 bolt pattern with a 71.5 mm center bore. While this pattern is standard across most Challenger and Charger Hellcat variants, always verify the specific wheel’s offset, hub bore, and brake clearance for your exact year and configuration to ensure proper fitment and safety. When in doubt, consult a wheel specialist or your dealer to confirm compatibility.
Is 4x100 the same as 4x4 bolt pattern?
Is 4 on 4" Bolt Pattern the Same Size as 4 on 100mm Bolt Pattern. Expert Reply: The 4 on 4" bolt hole pattern for the Loadstar ST175/80D13 Bias Trailer Tire with 13" White Wheel # AM3S030 is a little bit larger than a 4 on 100mm bolt hole pattern so they aren't interchangeable unfortunately.
Will 5x114.3 fit a Challenger?
3 but the two shouldn't be interchanged; putting 5x114. 3 wheels on your Challenger can cause vibrations or other issues . An adapter can be used instead, or better yet, a wheel with the correct PCD.
What cars use the 6x120 bolt pattern?
Vehicles with a 6x120 bolt pattern include many Buick, Cadillac, Chevrolet, and GMC models, such as the Buick Enclave, Cadillac XT5, Chevrolet Colorado, and GMC Acadia. This bolt pattern is also found on some Ford and Saab vehicles.
Buick
- Enclave (2018-2026)
- GL8 ES, LS, PHEV (2024-2026)
- Electra E4, E4 GS (2023-2025)
- Electra E5 (2023-2026)
- Century (2022-2025)
Cadillac
- XT5 (2016-2025)
- XT6 (2019-2025)
- SRX (2010-2017)
- Optiq, Optiq-V (2023-2026)
Chevrolet
Colorado (2015-2023), Traverse (2018-2023), Blazer, and Trailblazer (2021-2023).
GMC
Acadia (2017-2023), Canyon (2015-2023), and Terrain (2017-2023).
What lug pattern is Hellcat?
5x115mm
The bolt pattern on a 2008-2025 Hellcat Challenger spacer is 5x115mm or 5×4.53 inches. For a 1970-1983 Challenger, the bolt pattern (PCD) is 4×114.3mm (JT) and 5×114.3mm (E-body). There are two main types of Dodge wheel spacers, slip-on types, and bolt-on types.
