What is the bolt pattern on a Toyota Supra GR?
The bolt pattern for the Toyota GR Supra is 5x114.3 mm, with a center bore of 60.1 mm. This applies to the current GR Supra models in production since 2020.
In plain terms, five lug holes are arranged on a circle that measures 114.3 millimeters in diameter, and the hole in the center of the wheel hub is 60.1 millimeters wide. This specification helps determine which aftermarket wheels will bolt on without adapters, and which may require spacers or hub-centric rings. Always verify the exact specs for your specific VIN and model year with the wheel manufacturer or a Toyota dealer before purchasing wheels or tires.
Bolt pattern basics
The GR Supra’s wheel mounting is defined by two key measurements: the bolt pattern and the center bore. The pattern dictates how many lug holes there are and how far apart they are, while the center bore ensures the wheel centers properly on the hub to avoid runout and vibration. For the GR Supra, both specs are standardized across production years.
The following specifications are the core fitment details most wheel manufacturers and retailers list for the GR Supra:
- Bolt pattern: 5x114.3 mm (5 lug holes on a 114.3 mm circle)
- Center bore: 60.1 mm
These two figures are the primary criteria used to determine wheel compatibility. If you encounter wheels with a different bolt pattern, you would need adapters or a different wheel choice. If the center bore is larger than 60.1 mm, hub-centric rings may be used to center the wheel properly.
Markets, generations, and fitment notes
The bolt pattern described here applies to the GR Supra models released since 2020 (commonly referred to as the A90 and A90.5). Toyota has maintained this spec across major markets, so aftermarket wheel options that specify 5x114.3 mm generally align with the Supra’s mounting interface. Wheels intended for BMW platforms (which use different patterns such as 5x120) typically require careful verification and are not interchangeable without adapters or rings.
Considerations for aftermarket wheels
When shopping for wheels, use the GR Supra’s 5x114.3 mm pattern and 60.1 mm center bore as your baseline. Some aftermarket wheels designed for Toyota and Lexus platforms often fit without modification. If you are considering wheels from non-Toyota platforms, check compatibility thoroughly and plan for appropriate hub rings or mounting adapters, and confirm caliper clearance and brake rotor diameter to ensure proper fitment.
How to verify on your car
To confirm the bolt pattern on your specific vehicle, you can measure directly or consult official specifications for your exact model year. A quick way is to examine the stock wheel: count the lug holes (five) and measure the diameter of the circle that passes through the centers of the lug holes (114.3 mm). Then measure the center bore on the hub or the back of the stock wheel to confirm it is 60.1 mm.
If you’re unsure, contact a Toyota dealer or a professional tire and wheel shop. They can verify fitment for your VIN and advise on any adapters, rings, or brake-clearance considerations before ordering wheels.
Summary
In short, the Toyota Supra GR uses a 5x114.3 mm bolt pattern with a 60.1 mm center bore across its current production run. This specification is the primary determinant for wheel compatibility, and buyers should verify these numbers with wheel manufacturers and dealerships before making a purchase. Proper verification helps ensure a secure, balanced fit and avoids clearance issues with brakes or fenders.
Is 5x112 a common bolt pattern?
The 5x112 bolt pattern is commonly found on a range of vehicles, particularly those from German automakers like Audi, Volkswagen, and Mercedes-Benz. This pattern's key specifications are: Five bolt holes, providing a secure attachment for the wheel. A 112mm diameter circle passing through the center of these holes.
What Toyota has a 5x150 bolt pattern?
These are standard on vehicles such as Sequoia, Land Cruiser, Tundra, LX, and GX.
Is the Toyota 86 5x100?
PCD: 5x100. Size: 16x6. 5J. 1x Toyota 86 OEM Wheel.
What is the bolt pattern on the a90 Supra?
The bolt pattern for the A90 Toyota Supra is 5x112. The car uses an M14 x 1.25 bolt thread and has a 66.5mm center bore.
- Bolt Pattern: 5x112
- Bolt Thread: M14 x 1.25
- Center Bore: 66.5mm
