What is the bolt pattern on a TSX Wagon?
The TSX Wagon uses a 5-lug bolt pattern on a 114.3 mm circle (5x114.3). This is the standard pattern for most Honda/Acura mid-size models from that era.
The TSX Wagon sits on a familiar wheel layout inherited from the Honda Accord family, which helps explain why aftermarket wheels and adapters built for other Honda/Acura models often fit with minimal modification. However, exact specs can vary by year and market, so it's important to verify the specifics for your exact vehicle before purchasing wheels or adapters.
Bolt pattern specifics
To ensure you select wheels that fit without issue, here are the core measurements you’re likely to encounter on a TSX Wagon.
- Bolt pattern (PCD): 5 on 114.3 mm (5x114.3)
- Center bore: 64.1 mm
- Lug nut size: M12x1.5
- Common lug-nut wrench size: 19 mm
These specifications cover the most common TSX Wagon configurations from the mid-2000s through the early 2010s. Some aftermarket wheels may require hub-centric rings or slight adjustments, so always confirm with the wheel manufacturer or installer.
Why it matters for wheel swaps
Matching the bolt pattern is essential for safe mounting and proper alignment. Even a perfect-looking wheel can cause vibration or fitment issues if the PCD, center bore, or lug hardware don’t align with the vehicle’s hubs and studs.
Market variations and practical tips
Across regions, the TSX Wagon’s basic specs are largely consistent due to shared engineering, but year-by-year checks are still wise. When using wheels from different brands or generations, consider hub-centric rings if the wheel bore is larger than the hub to ensure precise centering and minimize vibrations.
Summary
In brief, the TSX Wagon commonly uses a 5x114.3 bolt pattern with a 64.1 mm center bore and M12x1.5 lug nuts. Always verify these measurements for your exact year and market, and consult official documentation or a trusted retailer if you’re uncertain.
