What is the paint code for WB 112 Ford?
WB 112 is not a widely published Ford color code and does not appear in standard Ford color lists. It may be a regional, dealer-specific, or third-party identifier rather than an official Ford paint code.
Color codes in Ford literature can vary by model year, market, and paint system. What looks like WB 112 could be a misreading, a legacy designation, or a non-Ford supplier’s label. To determine the precise color, you’ll need to cross-check the vehicle’s documentation or inspect the car itself. This article explains how to verify the correct code and what to do if WB 112 isn’t an official Ford designation.
Understanding Ford paint codes
Ford uses alphanumeric paint codes that typically appear on the vehicle’s information placard and sometimes on the door jamb, hood underside, or in the owner’s manual. The formats can vary by era, with combinations of letters and numbers that correspond to specific shades, finishes, and generations of paint. Because codes can change between model years and regions, a code seen in one market may not be present in another.
Possible origins of “WB 112”
The designation WB 112 could arise from several non-official sources. It may be a dealer stock label, an aftermarket or regional color reference, part of a supplier’s catalog, or a misread of a legitimate Ford code. Without a clear official listing, it’s not safe to assume WB 112 maps to a specific Ford color.
How to confirm the correct color code
To verify the exact colour code associated with WB 112 Ford or to identify the closest official Ford match, follow these steps:
- Locate the color code on the vehicle. Look at the driver's side door jamb sticker, but also check the firewall, trunk lid, or hatch area sometimes used on certain models and years. The code is usually labeled as "Paint" or "Color."
- Photograph or copy the sticker to compare with Ford’s color catalogs or to share with a dealer or repaint shop. Even small wear can obscure characters, so ensure the image is clear.
- Use the VIN to pull the original factory color. Many Ford dealers and third-party vehicle history or parts platforms can retrieve the paint code by VIN, which can help confirm whether WB 112 is an official Ford code for your exact vehicle.
- Consult a Ford dealer or certified body shop. Provide the VIN and any known codes (including WB 112) and ask them to verify the official paint code and the correct paint formula for your model year and market.
- Check regional literature or online archives. Some markets maintain separate color catalogs, especially for classic or imported models. If you’re dealing with a vintage or export vehicle, you may need to consult historical brochures or regional Ford documentation.
Clarity from the manufacturer or an authorized shop is essential, because selecting the wrong shade can result in a noticeable mismatch, especially for older finishes or two-tone schemes.
Notes on regional variations and vintage models
For older Ford vehicles or imports, paint naming and codes can differ from those used in Ford’s primary U.S. documentation. In some cases, a code like WB 112 might denote a regional tint, a two-tone combination, or a discontinued color. When in doubt, rely on the official color code tied to your specific vehicle by VIN and model year, rather than a generic label.
If you’re planning a repaint, always request a shade match from a reputable shop using a current Ford color library or an approved supplier. Provide the exact year, model, and VIN to maximize the chance of an accurate match.
Summary
In short, WB 112 is not recognized as a standard Ford paint code in common references. To determine the true color code for your WB 112 Ford, verify the code on the vehicle itself, use the VIN to pull the original factory color, and consult an authorized Ford dealer or body shop. If WB 112 is not an official Ford designation, you may need to rely on the closest official Ford color match or a carefully matched repaint.
