What is the part number for a Toyota fuel pump?
There isn't a single universal Toyota fuel pump part number. The exact number depends on your vehicle's model, year, engine and market, and must be looked up for the specific application.
Fuel pumps come in several configurations—such as in-tank assemblies, external pumps, and sending units—and Toyota's catalogs assign different numbers to each variant and revision. Because part numbers are tied to VIN-based specifications and regional catalogs, you must identify your exact vehicle details to obtain the correct part number.
Locate the correct part number
To identify the exact part number that matches your vehicle, follow these steps:
- Gather your vehicle identifiers: VIN, model year, trim level, engine code, and the country/region where the car was sold.
- Use Toyota's official parts catalog or an authorized dealer portal to search for "fuel pump" or "fuel pump assembly" for your model and engine.
- Review the part details to confirm whether it's an in-tank assembly, a standalone pump, or part of a sending unit, and check compatibility notes for your VIN.
- Inspect the current unit (if accessible) for any stamped part numbers or labeling to cross-reference with the catalog entry.
- When in doubt, contact a Toyota dealer parts counter or an authorized retailer and provide your VIN for an exact match.
Following these steps will help ensure you obtain the correct part number and avoid ordering errors. Always verify the VIN against the catalog entry before purchasing.
Where to look up Toyota fuel pump part numbers
Reliable sources for locating the correct part number include official Toyota catalogs and trusted dealers. The following options are commonly used:
- Toyota Official Parts Website or regional Parts Catalogs
- Authorized Toyota Dealers' Parts Counter (VIN-based lookup)
- VIN-based online parts lookup tools provided by Toyota or major retailers
- Repair manuals and service bulletins specific to your model/year
Always verify the part number with your VIN and the exact vehicle configuration. If you're unsure, contacting a dealer with your VIN will yield the precise match.
Model-specific considerations
Sedan and compact models (e.g., Camry, Corolla)
For most modern Toyota sedans, the fuel pump is part of an in-tank assembly or a dedicated pump module. Part numbers differ by generation and engine, so VIN-based lookup is essential.
SUVs and trucks (e.g., RAV4, Highlander, Tacoma)
The same VIN-driven approach applies: identify whether the vehicle uses an in-tank module or a different configuration, and confirm compatibility through official catalogs or dealer support.
Summary
There is no single universal part number for a Toyota fuel pump. The correct number depends on model, year, engine and market. Use your VIN to pull the exact application from official Toyota catalogs, verify whether you need an in-tank assembly or external pump, and confirm details with a dealer before purchasing. This careful process helps ensure you receive the correct part and avoid fitment issues.
How do I find out what fuel pump I need?
To find the right fuel pump, you need to know your engine's horsepower, fuel pressure requirements, and fuel type, as these factors determine the necessary flow rate and pressure the pump must provide. Additionally, you must decide between an in-tank or in-line pump and consider factors like voltage, filtration, and whether a return-style fuel system is appropriate for your vehicle.
Key factors to consider
- Horsepower: Higher horsepower engines require more fuel, so a higher flow rate (measured in gallons per hour or liters per hour) is needed.
- Fuel Pressure:
- Carbureted engines: Typically need lower pressure, between 4 and 9 psi.
- Fuel-injected (EFI) engines: Require much higher pressure, often between 40 and 60 psi.
- Forced induction engines (turbocharged or supercharged): Need pressure that increases with boost levels.
- Fuel Type: Some fuels, like E85, require a significantly higher flow rate than gasoline due to lower energy content.
- Voltage: The voltage supplied to the pump affects its flow rate; for example, a pump rated at 60 psi and 13.5 volts will flow more than the same pump at 12 volts.
- System Type:
- Return vs. non-return: A return-style system is generally recommended for EFI as it circulates fuel, which helps cool the pump and eliminates air pockets.
- In-tank vs. in-line: In-tank pumps are cooled by the fuel, while in-line pumps are often easier and less expensive to replace.
How to choose
- Determine your engine's needs: Find your engine's maximum horsepower, its specific fuel pressure requirements, and the fuel type it uses.
- Calculate the required flow rate: Use your horsepower and fuel type to estimate the required flow rate in gallons per hour (gph) or liters per hour (lph). A general rule of thumb is to calculate approximately 0.5 pounds of fuel per hour per horsepower for gasoline, but this can vary.
- Find a pump that meets the requirements: Look for a fuel pump that can provide the necessary flow rate at your required pressure and voltage.
- Consider system requirements: Decide on an in-tank or in-line pump and whether a return-style system is needed for your application.
- Account for other factors: Select a pump with appropriate filtration and fittings, and ensure your electrical system can handle the pump's power draw.
How much is a fuel pump for a Toyota?
The average cost for a Toyota Pickup Fuel Pump Replacement is between $504 and $800. Labor costs are estimated between $244 and $358 while parts are priced between $260 and $442.
Who makes the fuel pump for Toyota?
Denso is the primary manufacturer of Toyota fuel pumps, serving as the original equipment manufacturer (OEM) for many Toyota vehicles. Denso engineers and produces a wide range of automotive components for Toyota, including fuel pumps, to meet their specific requirements.
- Original Equipment Manufacturer (OEM): Denso is the OEM for many Toyota fuel pumps, meaning the parts are made by the company that originally supplied them to Toyota for assembly in new vehicles.
- Part of the Toyota ecosystem: Denso has a long-standing relationship with Toyota, providing numerous critical components beyond just fuel pumps, such as spark plugs, alternators, and engine control systems.
- Wide-ranging production: Denso, a global automotive parts manufacturer, produces fuel systems for many vehicle manufacturers, including high-pressure fuel pumps.
How to find fuel pump part number?
Part numbers, also sometimes referred to as model numbers, can be found on your pump's tag. A pump tag is a small rectangular plate that displays all the basic information about your pump.
