What is the recall on the 2011 Toyota Tundra?
There isn’t a single recall that applies to every 2011 Toyota Tundra. Recall status is VIN-specific and can change over time. To know the exact recalls affecting your truck, check official databases and consult your dealer.
Why recall data varies by VIN and model year
Each recall campaign targets a particular risk and a defined set of vehicles. Even within the same model year, production changes, regions, and the exact Vehicle Identification Number (VIN) can mean some trucks are listed for a recall while others are not. This variation is why you must use your VIN to confirm active campaigns.
How to check recall status for your 2011 Toyota Tundra
The quickest way to verify is to use VIN-based recall lookups and to contact a Toyota dealer with your VIN ready.
- Find your VIN: it’s located on the driver-side dashboard (visible through the windshield) and on the driver’s door jamb; it may also be listed on your vehicle documents.
- Visit official recall databases: use the NHTSA SaferCar.gov recall search or Toyota’s official Owners Site to input your VIN and view open campaigns.
- Review the results: note any active recalls, the campaign numbers, and required repairs or parts identified for your VIN.
- Contact a dealer: call or visit a local Toyota dealer with your VIN to confirm status and schedule service if needed.
- Know the cost coverage: recalls are typically honored at no charge to the owner when the service is performed at an authorized dealer.
Note: The above steps help you determine whether your specific vehicle is under active recall; if not, you can still be notified if a new recall is issued for your VIN.
Common recall themes affecting this model year
While campaigns are VIN-specific, certain categories have appeared in multiple recalls affecting Toyota pickups from this era. This section provides a high-level overview of typical areas that have seen action, not a VIN-specific list.
- Airbag inflator recalls (including Takata-related campaigns) that affected many Toyota models in the mid-2010s.
- Fuel system or fuel pump-related campaigns addressing potential stalls or failures.
- Brake, steering, or other safety-related component campaigns aimed at ensuring proper function and reliability.
- Wiring, restraint, or sensor-related campaigns that prompted inspections or replacements.
For any recall, follow the manufacturer’s instructions and have service performed by qualified technicians.
What to do if you’re unsure
If you can’t locate recall information for your VIN, contact Toyota customer service or your local dealer with your VIN to confirm status and recommended service.
Where to find authoritative recall information
Use VIN-based search tools from official sources to confirm open recalls and schedule service if needed.
- NHTSA’s SaferCar.gov recall search by VIN and recall numbers
- Toyota’s official Owners Site recall status by VIN
- Your local Toyota dealer for in-person verification and scheduling repairs
Using these sources ensures you have the most accurate, VIN-specific recall information for your 2011 Tundra.
Summary
In short, there isn’t a single recall that covers all 2011 Toyota Tundra trucks. Recall status is VIN-dependent and can change over time. To know exactly which campaigns apply to your vehicle, use VIN-based recall lookups on official sites or consult your Toyota dealer, and arrange repairs at no cost if required.
Are there any recalls on the 2011 Toyota Tundra?
14 Recalls for 2011 TOYOTA Tundra. Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain JTEKT power steering gear assembly service parts for 2007-2021 Tundra and 2008-2022 Sequoia, part numbers 44250-0C160, 44250-0C131, 44250-0C170, and 11250-0C121.
What is the biggest problem with a Toyota Tundra?
Reliability Issues with the Toyota Tundra
- Transmission problems.
- Frame rust and corrosion.
- Air injection pump failure.
- Exhaust manifold leaks.
How much is a 2011 Tundra worth?
The value of a 2011 Toyota Tundra varies widely based on condition, mileage, and trim, but a general range for a "clean" condition vehicle is around $7,900 for trade-in to over $18,000 for private sale, according to sources like Edmunds and Autotrader. For a more precise valuation, factors like a vehicle history report, specific options, and current market demand must be considered.
Key factors that determine value
- Condition: The truck's overall condition is a major factor, with values decreasing for average and rougher conditions.
- Mileage: Higher mileage will result in a lower value. For example, a truck with 265,375 miles was listed for $7,995, while one with 97,297 miles was listed for $19,200.
- Trim and options: Different trims have different base values. A CrewMax Limited trim, for instance, will have a higher value than a base model, especially with added features like a navigation system or backup camera.
- Vehicle History: A clean history report with no reported accidents or damage can increase a vehicle's value.
Example valuation ranges
- Trade-in value: A "clean" trade-in value for a 2011 Tundra can be around $7,902 to $8,915, depending on the specific model, notes Edmunds.
- Private party value: A private party sale can fetch a higher price, ranging from approximately $7,158 for an "average" condition vehicle to potentially over $18,000 for a truck with lower mileage and excellent condition, based on listings from Edmunds and Autotrader.
- Dealer retail value: The dealership's retail price is often the highest, typically reflecting the vehicle's condition, and can be seen in various online listings.
Which Tundra engines are being recalled?
The 3.4-liter twin-turbo V6 engine is being recalled for the 2022-2024 Toyota Tundra. The recall was expanded in November 2025 to include more vehicles and addresses the risk of engine stall or failure caused by manufacturing debris in the engine, which can damage the crankshaft bearings. The recall affects certain Tundras produced between November 2021 and February 2023, and additional vehicles produced between late December 2022 and early April 2024.
Affected vehicles and engine
- Engine: The affected engine is the 3.4L twin-turbo V6 (V35A).
- Models: The recall primarily impacts the 2022-2024 Toyota Tundra.
- Production dates:
- Initial recall: 2022-2023 Tundras produced between November 2021 and February 2023.
- Expanded recall: Additional Tundras produced between late December 2022 and early April 2024.
- Note: The recall does not affect the Tundra's i-FORCE MAX hybrid variant or 2024-2025 models produced after the issue was resolved.
Reason for the recall
- Cause: Machining debris from the manufacturing process was not adequately cleared from the engines.
- Effect: This debris can cause damage to the engine's main bearings, leading to potential engine failure, stalling, or inability to start.
What to do if you own an affected vehicle
- Check if your vehicle is part of the recall by visiting Toyota's recall website or the NHTSA website and entering your Vehicle Identification Number (VIN).
- Toyota will perform the necessary repairs free of charge once a fix is available.
