Loading

What is the rev limit on the S660?

The Honda S660 is a compact mid-engine sports car classified as a "kei car" in Japan, meaning it has a small 660cc engine. One of the key specifications of the S660 is its rev limit, which determines the maximum engine speed before the engine cuts out. This article will provide a detailed overview of the S660's rev limit and its significance.


What is the Rev Limit on the Honda S660?


The Honda S660 has a rev limit of 8,500 rpm. This means the engine will cut out if the driver exceeds 8,500 revolutions per minute. The rev limit is an important safety feature that prevents the engine from being over-revved, which could potentially cause damage.


Why is the Rev Limit Important?


The rev limit on the S660 is important for a few key reasons:



  • Engine Protection: The rev limit helps protect the engine from being over-revved, which can lead to mechanical failure and expensive repairs.

  • Performance Optimization: The rev limit is set to allow the engine to operate at its peak power and efficiency, providing the best balance of performance and reliability.

  • Legal Compliance: In many countries, kei cars like the S660 have strict displacement and power limits. The rev limit helps ensure the S660 meets these legal requirements.


By respecting the rev limit, S660 owners can enjoy the car's nimble handling and peppy performance without risking damage to the engine.


Driving the S660 Within the Rev Limit


To drive the S660 within the rev limit, drivers should pay close attention to the tachometer and shift gears before reaching the 8,500 rpm cutoff. Many S660 models also have rev-matching technology that automatically blips the throttle on downshifts, making it easier to keep the engine within the optimal rev range.


Experienced drivers may also learn to "short-shift", or shift gears slightly earlier than the rev limit, to maintain brisk acceleration while staying well within the engine's safe operating range.

What is the rev limit on the Honda S660?


7800rpm rev
S660's high RPM engine with a 7800rpm rev limit is deserved to be S series.



What is the rev limit on the LT6?


8,600 rpm
The DOHC system gives the LT6 the air it needs to make power up to 8,600 rpm.



What is the rev limiter on a Honda s600?


The tacho was red-lined at a stunningly high [9500]rpm. There was no rev limiter, so many owners saw [11,000-plus] – often followed by a detonation. Two versions were sold here: a soft-top (from March 1965) and a coupe (from December 1965).



What is the redline of the LT6 engine?


A testament to unrelenting craftsmanship, the hand-built LT6 5.5L engine features an all-new flat-plane crankshaft that gives it a signature growl. Strike fear in your competition as it hits a redline of 8600 rpm – 2000 rpm higher than Stingray.



What rpm is 60mph?


Every car has a different transmission and drive train gear ratio. And cars with different number of cylinders work at different RPMs. A range might normally run 2000–3000 with some probably higher and some lower but will be different for every engine/transmission/rear end and tire size combination.



What is the max rpm for Z06?


If you're the kind of person who loves the idea of a track car you can drive on the road, which is how GM is positioning this new Corvette, then the news about all that horsepower and the fact that the new Z06 has an 8,600-rpm redline and is able to produce 460 lb. -ft.



How fast can a S660 go?


about 87 mph
Top speed is 140 km/h, about 87 mph, and 0-60 mph times are irrelevant. Unlike its predecessor the Beat, the S660 is more a targa top than a full convertible.



What rpm is S660?


In the S660, this engine is mid-mounted and produces 64 PS (47 kW; 63 hp) at 6,000 rpm and 104 N⋅m (77 lb⋅ft) of torque at 2,600 rpm with a redline of 7,700 rpm for the manual transmission and 7,000 rpm for the CVT.



What is the best rpm for rev limiter?


- 2,250 to 9,000 rpm.



Can I remove my rev limiter?


If the vehicle was factory-equipped with a rev limiter, it is part of the ECM (Engine Control Module), and can only be removed by reprogramming the ECM. If the limiter is aftermaket, removing it may be as simple as unplugging it.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.