Loading

What is the tire pressure for a 2008 Honda Fit?

The recommended tire pressure for a 2008 Honda Fit is 30 PSI (pounds per square inch) for the front tires and 29 PSI for the rear tires. This information can be found in the owner's manual or on the driver's side door jamb sticker of the vehicle.


Understanding Tire Pressure for the 2008 Honda Fit


Maintaining the proper tire pressure is crucial for the safety, performance, and fuel efficiency of your 2008 Honda Fit. The manufacturer-recommended tire pressure ensures the tires are inflated to the optimal level, providing the best balance of handling, ride comfort, and tread wear.


The tire pressure recommendation for the 2008 Honda Fit is specific to this model year and can vary from other Honda Fit model years or other Honda vehicle models. It's important to always refer to the information provided by Honda, either in the owner's manual or on the driver's side door jamb sticker, rather than relying on a general tire pressure guideline.


Checking and Adjusting Tire Pressure


To check the tire pressure on your 2008 Honda Fit, you'll need a reliable tire pressure gauge. The recommended pressure is listed in PSI (pounds per square inch), so make sure your gauge can measure in PSI.



  • Locate the recommended tire pressure on the driver's side door jamb sticker or in the owner's manual.

  • Check the pressure in each tire, including the spare, when the tires are cold (meaning the vehicle has been parked for at least 3 hours or driven less than 1 mile).

  • If the tire pressure is too low, use an air compressor to inflate the tires to the recommended PSI.

  • If the tire pressure is too high, you can release air from the tires using the valve stem.


Maintaining the proper tire pressure is an important part of routine vehicle maintenance for your 2008 Honda Fit. Regularly checking and adjusting the tire pressure can help ensure your vehicle's safety, performance, and fuel efficiency.

Is 40 psi too high for tires?


Tire pressure increases when the tires are used, and for this reason, following the vehicle and tire brands' recommendation is crucial. Typically, if the recommended pressure levels are 35, then the tires should not use more than 40 psi. More than that will result in the before mentioned problems.



What psi should Honda car tires be?


If your tire pressure is low, the weight of your vehicle could put more pressure on the tires which could result in premature wear and damage. Most Honda sedans, like the Civic and Accord, require 32 PSI (pounds per square inch). Honda SUVs, like the Honda Pilot or Passport, require 35 PSI for their tires.



Is 35 psi for tires too high?


Ideal Tire Pressure
Tire pressure between 32 to 35 PSI is suitable for most vehicles. However, one can go as low as 20 PSI (although that is not recommended). Anything below 20 PSI is considered a flat tire. PSI stands for pounds per square inch.



What is the normal tire pressure for a Honda Fit?


If you have a pressure gauge at home or in the garage, you can quickly check all four tires in just a few minutes. It is best to check your tire pressure in the morning before driving, as driving can heat up the tires and give an inaccurate reading. As a rule of thumb, tire pressure should usually be between 32-36 PSI.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.