What is the torque spec for the Dodge Charger?
The torque specification for the Dodge Charger varies depending on the specific model and engine configuration. In general, the torque specifications for the Dodge Charger range from around 260 lb-ft to 650 lb-ft, depending on the engine and trim level.
Torque Specifications by Dodge Charger Model
Here are the typical torque specifications for some of the most popular Dodge Charger models:
- Dodge Charger SXT: 260 lb-ft of torque from the 3.6L V6 engine
- Dodge Charger R/T: 376 lb-ft of torque from the 5.7L HEMI V8 engine
- Dodge Charger Scat Pack: 485 lb-ft of torque from the 6.4L HEMI V8 engine
- Dodge Charger Hellcat: 650 lb-ft of torque from the supercharged 6.2L HEMI V8 engine
It's important to note that these torque figures are approximate and may vary slightly depending on the specific model year, engine configuration, and other factors. Always refer to the owner's manual or manufacturer specifications for the most accurate and up-to-date torque information for your Dodge Charger.
Importance of Proper Torque Specifications
Adhering to the correct torque specifications is crucial for the proper functioning and longevity of your Dodge Charger. Overtightening or undertightening fasteners can lead to a variety of issues, such as component failure, uneven wear, and even safety concerns. It's recommended to use a torque wrench when tightening any critical fasteners on your vehicle to ensure they are within the manufacturer's specified range.
If you're unsure about the proper torque specifications for your Dodge Charger or need assistance with any maintenance or repair tasks, it's always best to consult a qualified automotive technician or the vehicle's owner's manual for guidance.
What is the torque spec of the Dodge Charger?
Dodge Charger SXT Specs & Features
The Dodge Charger SXT opens the lineup and remains the standard model for the 2023 Dodge Charger. This vehicle comes outfitted with a 3.6-liter Pentastar engine capable of 292 horsepower and 264 pound-feet of torque.
What is the torque spec for bolts?
US Recommended Bolt Torque
| Size | Recommended Torque | |
|---|---|---|
| Grade 2 | Grade 8 | |
| 1/2" | 37 | 80 |
| 9/16" | 53 | 115 |
| 5/8" | 73 | 159 |
What is the torque setting for wheel bolts?
It depends on the car model, rim size, design (aluminium or steel rims) and number of bolts. It is normally between 110 N⋅m and 120 N⋅m. If you change the rims on your car, you will find the new torque values in the rim certificate.
What is the torque spec for tightening cylinder head bolts?
1> Small Engines (e.g., motorcycles, small cars): Typically, the torque for cylinder head bolts might range from about 60 to 100 foot-pounds (ft-lbs) or 80 to 135 Newton-meters (Nm).
What torque should bolts be?
US Recommended Bolt Torque
| Size | Recommended Torque | |
|---|---|---|
| Grade 2 | Bronze | |
| 1/2" | 37 | 40 |
| 9/16" | 53 | 53 |
| 5/8" | 73 | 86 |
Where do I find torque specs for my car?
Where To Find The Correct Manufacturer Recommended Torque Specs. The torque specs for the axle nut (and other nuts and bolts) should be listed in the dealership/shop guide provided by the manufacturer. If you can't find that information, or if you don't have a guide, you can find the specs in the service manual.
Is 250 ft/lbs of torque enough for lug nuts?
There are very few chances that 250 ft-lbs delivers enough torque to loosen lug nuts.
What is the torque spec for the lug nuts on a Dodge Charger?
Dodge Charger Wheel Torque Specs
| Year | Make | Torque Spec |
|---|---|---|
| 2006-2018 | Dodge | 110 Ft Lbs |
| 2009-2013 | Dodge | 140 Ft Lbs |
| 2015-2023 | Dodge | 115/130 Ft Lbs |
| 2019 | Dodge | 111 Ft Lbs |
How do I find my lug nut torque specs?
Finding the proper torque for lug nuts and lug bolts is the first step and can usually be found in the vehicles owner's manual. Utilizing a torque wrench is a must so you can be sure you're applying the correct torque for wheel nuts and bolts.
What torque is required for lug nuts?
80 to 120 foot-pounds
In general, lug nuts are often tightened to a torque specification ranging from 80 to 120 foot-pounds (ft-lbs) during installation. So, to remove them, you would ideally need at least the same amount of torque.
