What is the wheelbase of a 1935 Ford truck?
The wheelbase of a typical 1935 Ford pickup was about 110 inches (roughly 9 feet 2 inches), with some long-wheelbase configurations around 112 inches.
In 1935, Ford’s light-duty truck lineup included pickups and commercial bodies built on a shared chassis. The wheelbase figure you’ll encounter most often for standard pickups from that year sits near 110 inches, though certain bodies or specialized chassis could push the measurement to about 112 inches. This article outlines the common value, possible variations, and how to verify the exact figure for a specific vehicle.
Typical wheelbase values for 1935 Ford pickups
The following figures reflect common factory configurations for 1935 Ford trucks. Individual vehicles may vary based on body style and equipment.
- 110 inches (approximately 9 feet 2 inches) — standard pickup wheelbase, by far the most common for 1935 Ford trucks.
- 112 inches (approximately 9 feet 4 inches) — long-wheelbase commercial chassis used with certain bodies or bed configurations.
In practice, most 1935 Ford pickups adhered to the 110-inch baseline, with 112 inches appearing in a subset of long-wheelbase or specialized commercial configurations. Production records from Ford’s truck line indicate the 110-inch baseline covered the majority of standard pickups.
How to confirm the wheelbase on a specific truck
To verify the wheelbase for a particular 1935 Ford truck, use the following steps. They help ensure you rely on concrete measurements or official specifications rather than memory or visual estimation.
- Check the data plate or VIN/data tag on the vehicle. Some Ford truck data plates list the wheelbase or provide model-year specifications that include it.
- Measure the wheelbase directly: measure from the center of the front axle to the center of the rear axle with the vehicle on a level surface.
- Consult factory documentation: reference 1935 Ford truck manuals, catalogs, or service bulletins (physical archives or reputable digital reproductions) for the exact wheelbase for your model and body style.
- Compare with historical specifications: match the model name and body style to known factory figures (standard pickups typically align with the 110-inch baseline).
- When in doubt, reach out to classic Ford clubs or registries: they often have verified data for specific trim levels and production years.
If you cannot access official documentation directly, relying on established restorations, registry databases, and expert clubs is a reliable way to confirm the wheelbase for a given 1935 Ford truck.
Practical notes on measurement and interpretation
Bear in mind that modifications, after-market beds, or changes to suspension components can affect reported wheelbase. For historical accuracy, document the exact body configuration (cab type, bed length, and any alterations) when comparing to factory figures.
Summary
For the 1935 Ford truck, the standard wheelbase is commonly cited as 110 inches, with some long-wheelbase variants around 112 inches. If you need the precise figure for a specific vehicle, consult the original factory documentation or trusted registry resources, and consider measuring directly. Variations can occur due to body style, modifications, or special commercial chassis, so verifying the exact spec is advisable for accurate restoration or valuation.
